Allied-telesis AT-VIEW PLUS 3.0 DEVICE MANAGEMENT Uživatelský manuál stáhnout pdf (Strana 87)

Allied Telesyn AT-VIEW PLUS

DEVICE MANAGEMENT

Agent Menu

From the Agent menu, you can view and edit the system information for the device, or log into the

CLI using Telnet.

System Info

Displays basic system information, including system name, location, contact and description.

Network Info

Displays network-related information such as the device's IP address, and the default

gateway address.

Note - The current firmware version returns 'noSuchName' for the following parameters:

• Server Slip Address

• Host Slip Address

• Temporary Server Slip Address

• Temporary Host Slip Address

Firmware Info

Displays the version of the software running on the managed device.

Manager Address Info

Displays the management station's IP address.

Note - The current firmware version does not allow the Status parameter to be set to 'under

change'. Attempting to set it to 'under change' will result in the error message "The error

occurred with 'Set' operation. Error: bad value.".

Note - By default, the Status parameters are set to 'invalid'. To be able to set them to 'valid',

their corresponding IP Address parameters must first be set to valid values. Failing to do so

will result in the error message "The error occurred with 'Set' operation. Error: time out

occured."

Reset

Resets the system

Telnet

Starts a Telnet connection to the hub.

WEB Browser

Connects to the hub's HTTP server.

PN 613-50665 Rev A Page 87 of 257

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 256 257

Žádné komentáře

Allied-telesis AT-VIEW PLUS 3.0 DEVICE MANAGEMENT Uživatelský manuál Strana 87