Allied-telesis AT-VIEW PLUS 3.0 DEVICE MANAGEMENT Uživatelský manuál stáhnout pdf (Strana 144)

Allied Telesyn AT-VIEW PLUS

DEVICE MANAGEMENT

RPS

Green

Red

Gray

The switch is receiving power from the redundant power

supply.

RPS has failed.

RPS is not installed or RPS monitoring is disabled.

DUPLEX

Green

Orange

The port is operating at full duplex.

The port is operating at half duplex.

Device Manager LEDs for AT-8724XL-DC

LED State Description

PWR Green The switch is receiving power.

DUPLEX

Green

Orange

The port is operating at full duplex.

The port is operating at half duplex.

Note - AT-8724XL and AT-8724XL-DC share the same device image.

Note - Please refer to Uplink Modules for the operations and behavior of the uplink modules

installed in this device.

Note - To turn RPS monitoring on or off on the switch, from the switch command line interface

enter the command SET SYSTEM RPSMONITOR={ON|OFF}. To see whether RPS monitoring is

on, use the command SHOW SYSTEM. To turn on RPS monitoring using SNMP, set the

fanAndPsRpsMonitoringStatus variable to on.

Note - The current firmware version does not allow AT-View Plus Device Manager to support the

Reset button.

Note - The current firmware version does not allow AT-View Plus Device Manager to support the

RPS LED on the AT-8724XL-DC model.

Agent Menu

From the Agent menu, you can view and edit the system information for the switch, or log into the

CLI using Telnet.

System Info

Displays basic system information, including system name, location, contact and description.

PN 613-50665 Rev A Page 144 of 257

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 256 257

Žádné komentáře

Allied-telesis AT-VIEW PLUS 3.0 DEVICE MANAGEMENT Uživatelský manuál Strana 144