Allied-telesis AT-VIEW PLUS 3.0 DEVICE MANAGEMENT Uživatelský manuál stáhnout pdf (Strana 240)

Allied Telesyn AT-VIEW PLUS

DEVICE MANAGEMENT

AT-RG656BD

Device Manager LEDs for AT-RG600 Series

LED State Description

Green The residential gateway is receiving power.

DUPLEX

Green

Orange

The port is operating in full-duplex mode.

The port is operating in half-duplex mode.

PWR

Note - The current firmware version does not allow AT-View Plus Device Manager to determine the

negotiated mode for active LAN or WAN ports that are configured to auto-negotiate. As a result, the

Duplex LED will turn gray.

Note - AT-RG613xx : When link is established on a LAN or WAN port that is configured to auto-

negotiate, the current firmware version returns 'No such instance' for the Speed parameter under the

Standard sub-menu option. As a result, no speed is displayed on the RJ-45 LAN or WAN port

images.

Note - AT-RG634A : The Port Link State parameter may sometimes return the value "up" during the

refresh process. As a result, even inactive ports may turn green.

Note - AT-RG656BD : The current firmware version does not allow AT-View Plus Device Manager

to support the RPS LED when using SNMPv1 and SNMPv2c.

Note - AT-RG656BD: The current firmware version does not allow AT-View Plus Device Manager

to support the Reset button when using SNMPv1 and SNMPv2c.

PN 613-50665 Rev A Page 240 of 257

1 2 ... 235 236 237 238 239 240 241 242 243 244 245 ... 256 257

Žádné komentáře

Allied-telesis AT-VIEW PLUS 3.0 DEVICE MANAGEMENT Uživatelský manuál Strana 240