Allied-telesis AT-VIEW PLUS 3.0 DEVICE MANAGEMENT Uživatelský manuál stáhnout pdf (Strana 231)

Allied Telesyn AT-VIEW PLUS

DEVICE MANAGEMENT

AT-PB200 Series Switch Modules

PB201 PB202 PB202/1 PB202/3 PB202/4

LED State Description

DUP

Green

Gray

The media converter is operating in full-duplex mode.

The media converter is operating in half-duplex mode.

AN Green The 10/100Base-TX port is auto-negotiating.

Note - Connection cannot be established between a 10/100Base-TX port on an AT-PB200 series

module that is configured to auto-negotiate and a 10/100Base-TX port on another AT-PB200 series

module that is configured to operate at 100 full/half duplex.

Note -The current firmware version allows the Port A Speed parameter to be set to '10M' even if Port

A is only capable of operating at a speed of 100Mbps.

Note -The current firmware version allows the Port A Mode parameter to be set to 'auto' even if Port

A is not capable of auto-negotiation.

Note -When the Port B Mode parameter is set to 'auto', the current firmware version is unable to

provide information on the negotiated speed and mode for Port B. As a result, the speed reflected on

the port image may be a '10' when it should really be '100' and vice-versa. Also, expect the DUP

LED to be gray when it should really be green or orange.

PN 613-50665 Rev A Page 231 of 257

1 2 ... 226 227 228 229 230 231 232 233 234 235 236 ... 256 257

Žádné komentáře

Allied-telesis AT-VIEW PLUS 3.0 DEVICE MANAGEMENT Uživatelský manuál Strana 231