Allied-telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT Uživatelský manuál Strana 318

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 411
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 317
Event Log
Displays the RMON Event log.
Port Menu
From the Port menu, you can view and edit MIB information about the port.
Utilization
Displays the port's utilization information.
Interface Info
Standard
Displays high-capacity port statistics including received and transmitted
unicast/multicast/broadcast packets on the port, link up/down trap and port speed.
Note - The following parameters are not applicable to the AT-x900-12X series and
should be ignored:
Specific Media MIB
Received Non Unicast Packets
Transmitted Non Unicast Packets
Transmitted Buffer Length
Note - Device Manager will not display the correct state of the ports and duplex
LEDs if logged-on in SNMPv3 mode using a user account with no read access to the
Interface Info parameters.
Additional Info
Displays port statistics such as the number of frames received and transmitted on
the port, bytes received and transmitted on the port, and port status.
Note - The current firmware version returns a 'noSuchName' value for the following
parameters:
Received Bytes (HC)
Received Unicast Packets (HC)
Received Multicast Packets (HC)
Received Broadcast Packets (HC)
Transmitted Bytes (HC)
Transmitted Unicast Packets (HC)
Transmitted Multicast Packets (HC)
Transmitted Broadcast Packets (HC)
Note - The Promiscuous Mode parameter is implemented as 'read-only'.
AlliedView™-EMS 4.0.1 Device Management Guide Page 318 of 411
Zobrazit stránku 317
1 2 ... 313 314 315 316 317 318 319 320 321 322 323 ... 410 411

Komentáře k této Příručce

Žádné komentáře