Allied-telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT Uživatelský manuál stáhnout pdf (Strana 25)

100

101

 AT-8016F/xx

 AT-8024M

 AT-8088/xx

• The Spanning Tree Protocol (STP) does not work for the AT-A46 expansion module

when it is installed on an AT-8016F/ST device. As a result, the Port State parameter

of the AT-A46 expansion module port will never be set to 'blocking' and the port

image will never turn yellow.

• Connection between an AT-A47 expansion module port that is configured to

operate at 1Gbps full duplex and a port on another device can only be established if

the port on the other device is configured to auto-negotiate.

• For the AT-A47 expansion module, Device Manager will only display the AT-

A45/AT-A47/AT-STACKM shared GIF image if a GBIC module is present in the

GBIC slot.

• By default, the Port Speed and Mode parameter of the AT-A47 expansion module

port is set to 'auto sense'. From this mode, the Port Speed and Mode can only be

changed to '1Gbps full-duplex'. However, once set to '1Gbps full-duplex', it can no

longer be set to 'auto sense'.

AT-8000 Series

AlliedView™-EMS 4.0.1 Device Management Guide Page 25 of 411

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 410 411

Komentáře k této Příručce

Žádné komentáře

Allied-telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT Uživatelský manuál Strana 25

Komentáře k této Příručce

Související produkty a manuály pro Počítačový hardware Allied-telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT