Allied-telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Počítačový hardware Allied-telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT. Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 411
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků

Shrnutí obsahu

Strany 1 - DEVICE MANAGEMENT GUIDE

AlliedView™-EMS 4.0.1 DEVICE MANAGEMENT GUIDE AlliedView™-EMS 4.0.1 Device Management Guide Page 1

Strany 2 - TABLE OF CONTENTS

Port Right clicking on a port opens a pull-down menu specific to the device. Selecting a menu item opens another window and lets yo

Strany 3

Additional Info Displays additional traffic statistics in the network segment such as frames received/sent, collisions, broadcast f

Strany 4

Additional Info Displays port statistics such as the number of frames received and transmitted on the port, bytes received and tran

Strany 5

AT-9006 Family This section describes Device Manager menus and operations specific to the AT-9006SX/SC and AT-9006T switches. Topi

Strany 6

AT-9006T Device Manager LEDs for AT-9006 Family LED State Description PWR Green The switch is receiving power. RPS Green Gray

Strany 7

Network Info Displays network-related information such as agent's and default gateway address. Manager Address Info Displays

Strany 8

Event Log Displays RMON Event log. VLAN Menu From the VLAN menu, you can view the list of VLAN and member ports. Note - You canno

Strany 9 - Basic Operations

AT-9410GB This section describes Device Manager menus and operations specific to the AT-9410GB switch. Topics: • Main Window •

Strany 10 - Menu for stacked devices

Note - When a port on the AT-9410GB is set to 'auto sense' and is connected to a half-duplex port on another device, its

Strany 11 - LED status

Reset Resets the switch. Telnet Starts a Telnet connection to the switch. WEB Browser Connects to the switch's HTTP server.

Strany 12 - Utilization

Event Table Displays the RMON Event table. Event Log Displays the RMON Event log. Port Menu From the Port menu, you can view and

Strany 13

Port selection dialog box When you select a menu item acting on ports, a dialog box opens to let you select ports. Check the target

Strany 14 - AT-8016F/MT

Note - Valid MIB Set values for the Port State parameter are 'enabled' and 'disabled'. Attempting to set this p

Strany 15 - AT-8016F/ST

Routers AT-AR400S Series This section describes Device Manager menus and operations specific to the AT-AR400S Series. Topics: • M

Strany 16 - AT-8024GB

AT-AR440S AT-AR441S AlliedView™-EMS 4.0.1 Device Management Guide Page 112 of 411

Strany 17 - AT-8026FC

AT-AR442S AT-AR450S Device Manager LEDs for AT-AR400S Series LED State Description PWR Green The router is receiving power. D

Strany 18 - AT-8088/MT

AlliedView™-EMS 4.0.1 Device Management Guide Page 114 of 411 Device Manager LEDs for AT-AR400S Series Black Red The interface is

Strany 19

Route Table Displays the IP routing table on the router. IP Statistics Displays statistics about IP routing, including the number

Strany 20

Channel Configuration Displays ATM Channel configuration information. Note - The current firmware version does not allow the foll

Strany 21

Port Menu From the Port menu, you can view and edit MIB information about selected ports. Utilization Displays the port's ut

Strany 22

AT-AR410 This section describes Device Manager menus and operations specific to the AT-AR410 router. Topics: • Main Window • Ag

Strany 23 - • Expansion module ports

Agent Menu From the Agent menu, you can view and edit the system information for the router, or log into the CLI using Telnet. Syst

Strany 24

Utilization Utilization is calculated by the following formula. # of frames x (96 + 64) + octets x 8 Utilizat

Strany 25

Bridge Menu From the Bridge menu, you can view and edit bridge information such as the forwarding database and spanning tree status

Strany 26

Port Menu From the Port menu, you can view and edit MIB information about selected ports. Interface Info Displays port statistics s

Strany 27

AT-AR700 Series This section describes Device Manager menus and operations specific to the AT-AR700 Series. Topics: • Main Window

Strany 28

AT-AR745-DC Device Manager LEDs for AT-AR700 Series LED State Description PWR Green Red The router is receiving power from the m

Strany 29

Note - To turn RPS monitoring on or off on the router, enter the command SET SYSTEM RPSMONITOR={ON|OFF} from the command line inter

Strany 30

IP Statistics Displays statistics about IP routing, including the number of IP datagrams received. ICMP Statistics Displays ICMP

Strany 31 - AT-8000GS Series

Port Menu From the Port menu, you can view and edit MIB information about selected ports. Interface Info Displays port statistics s

Strany 32

AT-AR700S Series This section describes Device Manager menus and operations specific to the AT-AR700S Series routers. Topics: • M

Strany 33

AT-AR750S-DP AT-AR770S Note - AT-AR770S: DUP LEDs of active ports will always be orange regardless of the actual duplex mode of

Strany 34

Note - Please refer to Port Interface Cards (PICs) for the operations and behavior of the Port Interface Cards installed on these d

Strany 35

Layer 2 Switches AT-8000 Series This section describes Device Manager menus and operations specific to the AT-8000 Series. Topics:

Strany 36

Board Info Displays basic information on the boards that are currently installed. Slot Info Displays information on the Power Sup

Strany 37

LLDP Configuration General Config Displays basic LLDP configuration. Port Config Displays LLDP configuration for each port. Not

Strany 38

Note - The current firmware version returns the value 'NULL' for the OID parameter. Reset Cold Initiates a cold restart

Strany 39

Note - The following parameters are implemented as 'read-only':  Destination Port Number  Routing Type  Next Hop A

Strany 40

Note - The current firmware version does not allow the following parameters to be configured:  Connect Retry Interval  Configu

Strany 41

Note - If the In CLI (Calling Line Info) Search parameter is set to 'list', the In CLI (Calling Line Info) List Check par

Strany 42 -  Destination Port Number

PRI Interfaces Displays PRI interface information. PRI Channels Displays PRI channels information. Frame Relay DLC Management

Strany 43 -  Destination Metric 5

Errors Displays information about errors related to the Frame Relay module. Note - The Faults and Fault Time parameters are not a

Strany 44

Availability Menu From the Availability menu you can view and edit Server Load Balancing and Ping Polling information. Server Load

Strany 45

Note - The current firmware version does not allow the Address parameter to be configured. Ping Statistics Displays statistics

Strany 46

AT-8012M-QS AT-8016F/MT AlliedView™-EMS 4.0.1 Device Management Guide Page 14 of 411

Strany 47

Authenticator PAE Info Standard Displays standard authenticator PAE information. Note - The current firmware version returns a &a

Strany 48 -  Transmitted Octets

RMON Menu From the RMON menu you can view and edit the RMON MIB. Statistics Displays traffic statistics in the network segment atta

Strany 49

Error Statistics Displays error statistics. Note - The Ethernet Chip Set, Symbol Errors and Duplex Status parameters are not appl

Strany 50

Advanced Layer 2 Switches AT-8500 Series This section describes Device Manager menus and operations specific to the AT-8500 Series

Strany 51

AT-8524M AT-8524POE AlliedView™-EMS 4.0.1 Device Management Guide Page 144 of 411

Strany 52

AT-8550GB AT-8550SP Device Manager LEDs for AT-8500 Series LED State Description PWR Green The switch is receiving power. MA

Strany 53 -  Auto Edge Port

AlliedView™-EMS 4.0.1 Device Management Guide Page 146 of 411 Device Manager LEDs for AT-8500 Series LED State Description DUPL

Strany 54

Network Info Displays network-related information such as the addresses of the default gateway and the agents. Note - The current

Strany 55

Routing Menu From the Routing menu, you can view and edit information about the switch's routing functions. IP ARP Table Disp

Strany 56

Bridge Menu From the Bridge menu, you can view and edit bridge information such as the forwarding database and the spanning tree st

Strany 57

AT-8016F/SC AT-8016F/ST AlliedView™-EMS 4.0.1 Device Management Guide Page 15 of 411

Strany 58

Alarm Table Displays the RMON Alarm table. Event Table Displays the RMON Event table. Event Log Displays the RMON Event log. Po

Strany 59

Note - The Port CoS/QoS Priority parameter is not applicable to the AT-8500 series and should be ignored. Note - AT-8550 : The c

Strany 60

Traffic Classes Displays Traffic Class parameters used to provide most of the QoS controls. Note - The current firmware version a

Strany 61

MAC Address Security Displays MAC Address Security parameters and allows you to set the security level for dynamic and static MAC a

Strany 62

• The AT-A46 expansion module port cannot be manually set to 1000Mbps. However, the current firmware version allows the Port Speed

Strany 63

AT-8700XL Series This section describes Device Manager menus and operations specific to the AT-8700XL Series of Advanced Layer 2 S

Strany 64

AT-8748XL Device Manager LEDs for AT-8700XL Series (AC Models) LED State Description PWR Green Red The switch is receiving powe

Strany 65

Note - Please refer to Uplink Modules for the operations and behavior of the uplink modules installed on these devices. Note - To t

Strany 66

Routing Menu From the Routing menu, you can view and edit information about the switch's IP routing functions. ARP Table Displ

Strany 67

Port Menu From the Port menu, you can view and edit MIB information about the port. Utilization Displays the port's utilizatio

Strany 68

AT-8024 AT-8024GB AlliedView™-EMS 4.0.1 Device Management Guide Page 16 of 411

Strany 69

Layer 3 Switches AT-8600 Series This section describes Device Manager menus and operations specific to the AT-8600 Series Layer 3

Strany 70

AT-8624T/2M AT-8648T/2SP Device Manager LEDs for AT-8600 Series LED State Description PWR Green Red The switch is receiving pow

Strany 71 -  Port Number

AlliedView™-EMS 4.0.1 Device Management Guide Page 162 of 411 Device Manager LEDs for AT-8600 Series LED State Description Red

Strany 72

Routing Menu From the Routing menu, you can view and edit information about the switch's IP routing functions. ARP Table Disp

Strany 73

Port Menu From the Port menu, you can view and edit MIB information about the port. Utilization Displays the port's utilizati

Strany 74

AT-8800 Series This section describes Device Manager menus and operations specific to the AT-8800 Series of Intelligent Workgroup

Strany 75

AT-8848 Device Manager LEDs for AT-8800 Series LED State Description PWR Green Red The switch is receiving power from the main

Strany 76

System Info Displays basic system information, including system name, location, contact and description. Firmware Info Displays a

Strany 77

Displays the IP routing table on the switch. IP Statistics Displays statistics about IP, such as the number of IP datagrams recei

Strany 78

Spanning Tree Info Displays the port's spanning tree parameters. MAU Info Displays interface-related MAU information for th

Strany 79 - AT-8300GB Series

AT-8024M AT-8026FC AlliedView™-EMS 4.0.1 Device Management Guide Page 17 of 411

Strany 80

AT-8948 This section describes Device Manager menus and operations specific to the AT-8948 Enhanced Layer 3+ Switch. Topics: • M

Strany 81

Device Manager LEDs for the AT-8948 LED State Description PWR 1 and PWR 2 Green Gray There is a power supply unit (PSU) in the P

Strany 82

Note - The current firmware version does not allow the Temperature Threshold parameter to be configured. Host Resources General Sys

Strany 83

Note - The current firmware version accepts inputs from 5 to 32 characters for the Startup Config and Save Running Config parameter

Strany 84

Routing Menu From the Routing menu, you can view and edit information about the switch's IP routing functions. IP ARP Table Di

Strany 85

TCP Connection Info Displays TCP connection-specific information. Note - The Connection Status parameter is implemented as '

Strany 86 - AT-8400

Discard/Aging Time Info Displays information about the number of address entries that were learned but discarded for reasons such a

Strany 87

Port Tx Displays statistics for LLDP frames transmitted. Port Rx Displays statistics for received LLDP frames. Local System Dat

Strany 88

Ping Polling Ping Status Displays the status of the Ping polling. Note - The current firmware version only allows the Ping Status

Strany 89

Ping Statistics Displays statistics of the Ping polling. Security Menu From the Security menu, you can view and edit port access en

Strany 90

AT-8026T AT-8088/MT AlliedView™-EMS 4.0.1 Device Management Guide Page 18 of 411

Strany 91 -  Spanning Tree Info

Supplicant PAE Statistics Displays the statistics for the PAE supplicant. MAC-based Authentication PAE Port Info Displays PAE por

Strany 92

Note - The current firmware version returns a 'noSuchName' value for the Port Alias and Counter Discontinuity Time parame

Strany 93 - AT-8411

Port Trunking Aggregator Port List Displays Link Aggregation Control information for every Aggregation Port associated with this de

Strany 94 - AT-8412

AT-x900-48 Series This section describes Device Manager menus and operations specific to the AT-x900-48 Series Enhanced Layer 3+ S

Strany 95 - AT-8413

AT-x900-48FS Device Manager LEDs for the AT-x900-48 Series LED State Description PWR 1 and PWR 2 Green Gray There is a power su

Strany 96 - AT-8414

Agent Menu From the Agent menu, you can view and edit the system information for the switch, or log into the CLI using Telnet. Syst

Strany 97

Hardware Info Total Boards Displays the number of boards that are currently installed. Board Info Displays basic information on t

Strany 98

Load Parameters Displays information about the files to be loaded. DHCP Ranges Displays information about the DHCP module. Rese

Strany 99

Note - The following parameters are implemented as 'read-only':  Destination Port Number  Routing Type  Next H

Strany 100 - Port Menu

Note - The current firmware version does not allow the following parameters to be configured:  Connect Retry Interval  Configu

Strany 101 -

AT-8088/SC Device Manager LEDs for AT-8000 Series LED State Description PWR Green The switch is receiving power. MASTER Orange

Strany 102 - Main Window

LLDP Menu From the LLDP menu, you can view and edit LLDP information such as the LLDP Port Configuration and Local System Data. L

Strany 103 - Agent Menu

Note - Device Manager does not handle objects of type OCTET STRING correctly. As a result, the Port Tx Enable parameter will displa

Strany 104 - RMON Menu

Note - Valid MIB Set values for the Time Interval parameter should range from 0 to 604800. However, the current firmware version al

Strany 105 - VLAN Menu

Note - Device Manager does not handle objects of type BITS correctly. As a result, the Capabilities parameter will display an 8-bit

Strany 106

RMON Menu From the RMON menu you can view and edit the RMON MIB. Statistics Displays traffic statistics in the network segment atta

Strany 107

Note - The following parameters are not applicable to the AT-x900-48 series and should be ignored: • Ethernet Chip Set • Symbol

Strany 108

LACP Statistics Displays Link Aggregation information for every port that is associated with this device. LACP Debug Displays Lin

Strany 109

Rapier This section describes Device Manager menus and operations specific to Rapier Layer 3 Fast Ethernet Switches. Topics: • M

Strany 110

Rapier 16Fi/SC AlliedView™-EMS 4.0.1 Device Management Guide Page 198 of 411

Strany 111

Rapier 24i Rapier 48i AlliedView™-EMS 4.0.1 Device Management Guide Page 199 of 411

Strany 112 - AT-AR441S

TABLE OF CONTENTS BASIC OPERATIONS...

Strany 113

Note - Setting the 'Active Protocol Version' to 'STP' and 'Spanning Tree Status' to 'enabled&apo

Strany 114 - Routing Menu

Rapier G6 Rapier G6F-LX/SC AlliedView™-EMS 4.0.1 Device Management Guide Page 200 of 411

Strany 115 - ATM Menu

Rapier G6F-SX/SC Rapier G6F-SX/MT AlliedView™-EMS 4.0.1 Device Management Guide Page 201 of 411

Strany 116 - SHDSL Menu

Device Manager LEDs for Rapiers LED State Description PWR Green Red The switch is receiving power from the main power supply. Th

Strany 117

Telnet Starts a Telnet connection to the switch. WEB Browser Opens your web browser and connects to the switch's HTTP serv

Strany 118

Discard/Aging Time Info Displays information about the number of address entries that were learned but discarded because either th

Strany 119

Port Menu From the Port menu, you can view and edit MIB information about the port. Utilization Displays the port's utilizatio

Strany 120

AT-Rapier 48w This section describes Device Manager menus and operations specific to the AT-Rapier 48w switch. Topics: • Main Wi

Strany 121

Device Manager LEDs for the AT-Rapier 48w LED State Description PWR Green The router is receiving power from the main power s

Strany 122

Note - Device Manager does not handle objects of type OCTET STRING correctly. As a result, the Time and Date parameter will display

Strany 123

Note - The current firmware version does not allow any of the parameters under this table to be configured. File System Total Fil

Strany 124

Note - MAC Address Table entries created through a local or telnet management session will not be visible to Device Manager until t

Strany 125 - Call List Menu

Port Info Displays information on the LLDP of local ports. Note - The current firmware version returns the value 'NULL'

Strany 126

Address Table Displays the list of IP interfaces on the switch. Route Number Displays the IP routing number on the switch. Rou

Strany 127

DHCP Ranges Displays information about the DHCP module. BGP General Info Displays information about the BGP module. Peer Info D

Strany 128

Spanning Tree Info Displays spanning tree parameters such as priority and cost. Note - Valid MIB Set values for the Port Path Cos

Strany 129

Note - The PPP Template parameter specifies the PPP template to use when creating dynamic PPP interfaces for calls generated. The v

Strany 130

DS1 DS1 Config Displays DS1 configuration Note - The current firmware version returns a 'noSuchName' value for the Port

Strany 131

Open TCP Connections Displays open TCP connections information. Ping Polling Ping Status Displays the status of the Ping polling.

Strany 132

Security Menu From the Security menu, you can view and edit port access entity information such as the PAE port inofrmation and the

Strany 133

MAC-based Authentication PAE Port Info Displays the PAE port information. Note - The Initialize parameter is implemented as &apos

Strany 134 - LAN/WAN Menu

Note - Although the current firmware allows the Administration Status parameter to be set to 'testing', the value 't

Strany 135

RMON Menu From the RMON menu you can view and edit the RMON MIB. Statistics Displays traffic statistics in the network segment atta

Strany 136

Port Trunking Aggregator Port List Displays Link Aggregation Control information for every Aggregation Port associated with this d

Strany 137

SwitchBlade This section describes Device Manager menus and operations specific to the SwitchBlade Series, including the AT-SB4211

Strany 138 - Availability Menu

Main Window SwitchBlade 4004 with SB4211 Switch Controller, SB4215 Bandwidth Expander, and Line Cards installed AlliedView™-EMS 4.

Strany 139 - Security Menu

SwitchBlade 4008 with SB4211 Switch Controller and Line Cards installed AlliedView™-EMS 4.0.1 Device Management Guide Page 223 o

Strany 140

Device Manager LEDs for AT-SB4211 Switch Controller LED State Description PWR Green The PSU is receiving power from its supply

Strany 141

Config File Name Displays the file name of the start-up configuration file. Boards Info Displays information about the chassis bo

Strany 142

Forwarding Database Standard View Displays the Forwarding Database table as returned by the device. Enhanced View Displays the F

Strany 143

Spanning Tree Info Displays the port's spanning tree parameters. The Port Number displayed is the MIB object dot1dBasePort.

Strany 144 - AT-8524POE

SwitchBlade Line Cards This section describes the SwitchBlade Line Cards in Device Manager. If the following Line Cards are instal

Strany 145

LED State Description DUPLEX Green Orange The port is operating at full-duplex. The port is operating at half-duplex. AT-SB444

Strany 146

Note - Valid MIB Set values for the Port Flow Control parameter are 'disable', 'transmit-only', 'receive-o

Strany 147

AT-SB4451 / AT-SB4452 / AT-SB4461 / AT-SB4462 8-Port (SC) 1000BASE-SX Gigabit Ethernet Line Card 8-Port (MT-RJ) 1000BASE-SX Giga

Strany 148

Multi-Layer Gigabit Switches AT-9400 Series This section describes Device Manager menus and operations specific to the AT-9400 Ser

Strany 149

AT-9424T/GB AT-9424T/SP AT-9424T AlliedView™-EMS 4.0.1 Device Management Guide Page 232 of 411

Strany 150

AT-9424T/POE AT-9424Ts AlliedView™-EMS 4.0.1 Device Management Guide Page 233 of 411

Strany 151 -  egress-queue-3

AT-9424Ts/XP AT-9448T/SP AlliedView™-EMS 4.0.1 Device Management Guide Page 234 of 411

Strany 152

AT-9448Ts/XP Device Manager LEDs for AT-9400 Series LED State Description PWR Green The switch is receiving power. MASTER Oran

Strany 153 - Expansion Module Notes

Note - Status information for combo ports will always be reflected on both the RJ-45 port images and the GBIC/SFP port images regar

Strany 154

Note - When multiple units of the AT-9400 are stacked together, the current firmware version will always return the value '1

Strany 155

Voltage Info Displays voltage information. Note - This table is applicable to the L2+ models only. Management Info General Conf

Strany 156

Note - L3 Models: The current firmware version does not return any Set Error when configuring the Status parameter to 'not i

Strany 157

Note - Valid MIB Set values for the Mirroring Destination Port parameter should range from 0 to 24. However, the current firmware

Strany 158

UDP Listener Info Displays UDP listener information. UDP Statistics Displays UDP statistics. TCP Connection Info Displays TCP c

Strany 159

Spanning Tree Info Displays spanning tree parameters such as priority and cost. Note - The current firmware version does not allo

Strany 160

RMON Menu From the RMON menu you can view and edit the RMON MIB. Statistics Displays traffic statistics in the network segment atta

Strany 161

Port Menu From the Port menu, you can view and edit MIB information about the port. Utilization Displays the port's utilizatio

Strany 162

Additional Info Displays Bad Frames Received and Collision parameters. Note - Use SNMP v2c or v3 to view this table. Detail Inf

Strany 163

Port Mirroring Displays Port Mirroring parameters and allows you to create/delete a port mirror. Note - The Mirroring Source Mo

Strany 164

Note - L3 Models: The current firmware version does not allow the Attack Action Status parameter to be set to 'enabled'

Strany 165

AT-9700 Series This section describes Device Manager menus and operations specific to the AT-9700 Series of Advanced Layer 3 Gigab

Strany 166

AT-9748TS/XP The AT-9748TS/XP supports up to 8 AT-9748TS/XP stacked switches with no uplinks or 5 AT-9748TS/XP stacked switches wi

Strany 167

AlliedView™-EMS 4.0.1 Device Management Guide Page 249 of 411 AT-9748TS/XP (With 10G Uplink) AT-9748TS/XP (No Uplink) AT-9724T

Strany 168

 AT-8016F/xx  AT-8024M  AT-8088/xx • The Spanning Tree Protocol (STP) does not work for the AT-A46 expansion module

Strany 169

 Box ID 1 - 1 to 64  Box ID 2 - 65 to 128  Box ID 3 - 129 to 192  Box ID 4 - 193 to 256  Box ID 5 - 257 to 320  Box ID

Strany 170

Unit Info Displays information about the system's stacking mode, units supported in the system, total number of ports and num

Strany 171

IP Protocol Info Displays information about the IP interfaces supported by the system. Multiple Image List Displays information a

Strany 172

Note - The current firmware version does not allow the following parameters to be configured:  Repeating Start  Repeating End

Strany 173

Forwarding Database Displays the Forwarding Database table. ARP Aging Time Displays the timeout period in minutes for aging out d

Strany 174

Route Preferences Displays configurations of routing preferences. Route Redistribution Displays the route redistribution table

Strany 175

Note - The current firmware version does not allow the following parameters to be configured:  AS Border Router Status  Type

Strany 176 - LLDP Menu

 Demand  Authentication Type  Authentication Key  Authentication Key ID  Row Status Interface Metric Displays the Ty

Strany 177

Interface Info Displays a list of the device's multicast capable interfaces. Note - The current firmware version does not re

Strany 178

Note - The current firmware version returns ‘noSuchName’ for the Join/Prune Interval parameter and does not allow it to be config

Strany 179

AlliedView™-EMS 4.0.1 Device Management Guide Page 26 of 411 AT-8000/8POE This section describes Device Manager menus and operat

Strany 180

Component Displays the list of objects specific to a PIM. Note - The Component sub-menu option does not display the correct par

Strany 181

Scope Boundary Info Displays a list of the device's scoped multicast address boundaries. Note - The Scope Boundary Info su

Strany 182

Note - If the MD5 Key parameter is set to a new value whose length is shorter than the length of the previously active MD5 Key, a

Strany 183

Statistics Displays statistics about frames received/transmitted on the switch port. High Capacity Ports Displays statistics abou

Strany 184

VLAN Info Displays VLAN parameters such as the maximum supported VLANs and maximum group number per VLAN. Query Info Displays I

Strany 185

Note - The current firmware version does not allow the Primary IP Address and Authentication Key parameters to be configured. Not

Strany 186

Note - The current firmware version returns 'noSuchName' for the Port Number parameter. Authenticator PAE Diagnostics D

Strany 187

Note - The Authenticator PAE Diagnostics sub-menu option does not display the correct parameters. Instead, it displays the sub-menu

Strany 188

Public Key Algorithm Displays the status of the RSA and DSA public key algorithms. Secure Socket Layer SSL Config Displays the st

Strany 189

Server Info Displays information about servers. Note - The current firmware version does not allow the Authentication Key paramet

Strany 190

AlliedView™-EMS 4.0.1 Device Management Guide Page 27 of 411 will always show an SFP image regardless of whether or not an SFP mo

Strany 191

Packet Content Info Displays ACL mask of user-defined information. Note - The current firmware version does not allow the follo

Strany 192

Probe Probe Config Displays RMON probe information. Note - The current firmware version returns 'noSuchName' for the D

Strany 193

Note - The Port Flow Control parameter is not applicable to the 10Gbps ports on the AT-XP9700 expansion module. Spanning Tree Inf

Strany 194

QoS Basic Config Displays QoS parameters and allows enabling of Hol prevention status and setting of scheduling mechanism. Schedu

Strany 195

Note - The current firmware version does not allow the Actor System Priority and Collector Maximum Delay parameters to be configure

Strany 196

Expansion Module Notes • The current firmware version does not allow Device Manager to detect the presence or absence of an XFP tr

Strany 197

AT-9800 Series This section describes Device Manager menus and operations specific to the AT-9800 Series of Multi-Layer Gigabit Sw

Strany 198 - Rapier 16Fi/SC

AT-9816GB Device Manager LEDs for AT-9800 Series LED State Description PWR Green Red The switch is receiving power from the main

Strany 199 - Rapier 48i

Agent Menu From the Agent menu, you can view and edit the system information for the switch, or log into the CLI using Telnet. Syst

Strany 200 - Rapier G6F-LX/SC

Routing Menu From the Routing menu, you can view and edit information about the switch's IP routing functions. ARP Table Displ

Strany 201

AlliedView™-EMS 4.0.1 Device Management Guide Page 28 of 411 WEB BrConnects to the switch's HTTP server. Bridgu, you can v

Strany 202

Port Menu From the Port menu, you can view and edit MIB information about the port. Utilization Displays the port's utilizatio

Strany 203

AT-9900/AT-9900s Series This section describes Device Manager menus and operations specific to the AT-9924T, AT-9924SP, AT-9924T/4

Strany 204

AT-9924SP AT-9924T/4SP AlliedView™-EMS 4.0.1 Device Management Guide Page 282 of 411

Strany 205

AT-9924Ts Device Manager LEDs for AT-9900/AT-9900s Series LED State Description PWR 1 and PWR 2 Green Gray Red There is a powe

Strany 206

Agent Menu From the Agent menu, you can view and edit the system information for the switch, or log into the CLI using Telnet. Syst

Strany 207

Address Table Displays the list of IP interfaces on the switch. Route Table Displays the IP routing table on the switch. IP S

Strany 208

Error Statistics Displays error statistics. Spanning Tree Info Displays the port's spanning tree parameters. MAU Info Disp

Strany 209

AT-x600 Series This section describes Device Manager menus and operations specific to the AT-x600 Series Advanced Layer 3 Gigabit

Strany 210

AT-x600-24Ts/XP AlliedView™-EMS 4.0.1 Device Management Guide Page 288 of 411

Strany 211

AT-x600-48Ts AlliedView™-EMS 4.0.1 Device Management Guide Page 289 of 411

Strany 212

AlliedView™-EMS 4.0.1 Device Management Guide Page 29 of 411 • Set the etherStatsStatus (1.3.6.1.2.1.16.1.1.1.21) object to &quo

Strany 213

AT-x600-48Ts/XP Device Manager LEDs for the AT-x600 Series LED State Description PWR Green Gray The Power Supply Unit (PSU) is

Strany 214

AlliedView™-EMS 4.0.1 Device Management Guide Page 291 of 411 Device Manager LEDs for the AT-x600 Series LED State Description

Strany 215

Displays basic system information, including system name, location, contact and description. Note - Valid MIB Set values for the

Strany 216

Displays resource information about the storage devices. Note - The current firmware version returns a "noSuchName" val

Strany 217

Note - Configuring the Save Current Software parameter to values greater than its valid range will be accepted but will cause the d

Strany 218

File System Standard Displays the standard file system information of the device. Note - Device Manager does not handle objects

Strany 219

Default Config Displays the default config file info of the device. GUI Configurations Displays the latest GUI applet file residi

Strany 220

Trigger Trigger Info Displays the trigger configuration information in the device. Trigger Counters Displays counters in activati

Strany 221 - SwitchBlade

WEB Browser Connects to the switch's HTTP server. Routing Menu From the Routing menu, you can view and edit information abou

Strany 222

 Next Hop AS Number  Destination Metric 1  Destination Metric 2  Destination Metric 3  Destination Metric 4  Destinatio

Strany 223

AT-8400 ...

Strany 224

AlliedView™-EMS 4.0.1 Device Management Guide Page 30 of 411 Interface Info Displays port statistics such as the number of packet

Strany 225

DNS Client Displays DNS Client information. Bridge Menu From the Bridge menu, you can view and edit bridge information such as th

Strany 226

Note - The Traffic Class Priority parameter is not applicable to the AT-x600 series and should be ignored. Note - The Receive

Strany 227

Note - The following parameters are not applicable to the the AT-x600 series and should be ignored:  Specific Media MIB  Rec

Strany 228 - SwitchBlade Line Cards

Note - The Received Address parameter is not applicable to the AT-x600 series and should be ignored Note - The Received Address

Strany 229

Note - The Mau Type List Bits and HC False Carriers parameters are not applicable to the AT-x600 series and should be ignored. No

Strany 230

Enable Enables the port. Disable Disables the port. Stacking Menu From the Stacking menu, you can view and edit the Stacking MIB.

Strany 231

AT-x900-12X Series This section describes Device Manager menus and operations specific to the AT-x900-12X Series Advanced Layer 3

Strany 232

Device Manager LEDs for the AT-x900-12X Series LED State Description PWR Green The Power Supply Unit (PSU) is installed and f

Strany 233 - AT-9424Ts

Agent Menu From the Agent menu, you can view and edit the system information for the switch, or log into the CLI using Telnet. Syst

Strany 234 - AT-9448T/SP

Host Resources General System Info Displays general information about the host resources. Note - Device Manager does not handle o

Strany 235

AT-8000GS Series This section describes Device Manager menus and operations specific to the AT-8000GS Series. Topics: • Main Wind

Strany 236

Hardware Info Total Expansion Modules Installed Displays the number of expansion modules installed in the device. Installed Modul

Strany 237

Features Info Displays information about the feature licenses installed on the device. Install New License Allows the user to ins

Strany 238

SD Card Displays information about the installed SD cards. Config File Info Device Configurations Current Config Allows the user

Strany 239

System Log Log Entries Displays information of the log entries on the device. Note - The current firmware version returns a &ap

Strany 240

Note - The current firmware version returns a 'noSuchName' value for the Ping Probe History Table parameters. Restart

Strany 241

Route Number Displays the IP routing number on the switch. Route Table Displays the IP routing table on the switch. Note - Th

Strany 242

ICMP Statistics Displays ICMP statistics. DNS DNS Server Displays DNS server information. Note - The current firmware version

Strany 243

Basic Bridge Info Displays basic bridge information. Bridge Port Info Displays bridge port information. Note - The current firm

Strany 244

Event Log Displays the RMON Event log. Port Menu From the Port menu, you can view and edit MIB information about the port. Utiliz

Strany 245

Note - The Counter Discontinuity Time parameter is not applicable to the AT-x900-12X series and should be ignored. Note - Valid M

Strany 246

Main Window AT-8000GS/24, AT-8000GS/24POE and AT-8000GS/48 The AT-8000GS/24, AT-8000GS/24POE and AT-8000GS/48 can be combined to f

Strany 247

MAC Control Pause Displays information about the MAC Control Pause function on a single ethernet-like interface. Note - The curre

Strany 248

Aggregator Port List Displays Link Aggregation Control information for every Aggregation Port associated with this device. Note -

Strany 249

AT-x900-24X Series (AlliedWare) This section describes Device Manager menus and operations specific to the AT-x900-24X Series Adva

Strany 250

AT-x900-24XT AT-x900-24XT-N Device Manager LEDs for the AT-x900-24X Series LED State Description PWR 1 and PWR 2 Green Gray Th

Strany 251

AlliedView™-EMS 4.0.1 Device Management Guide Page 324 of 411 Device Manager LEDs for the AT-x900-24X Series LED State Descrip

Strany 252

Power Supply Bays Displays information about the Power Supply Bays in the system and info on any devices that are present. Power

Strany 253

Slot Info Displays information on the Power Supply Bay slots. Physical Interfaces Displays information about the interfaces found

Strany 254

Ping Polling Ping Status Displays the status of the Ping polling. Note - Since the Address parameter cannot be configured, the Pi

Strany 255 -  Source IP Address

Note - The web browser can only contact the device if the device has a valid resource file loaded and set, and the HTTP server and

Strany 256

UDP Statistics Displays UDP statistics. TCP Connection Info Displays TCP connection-specific information. Note - The Connection

Strany 257

AlliedView™-EMS 4.0.1 Device Management Guide Page 33 of 411 Device Manager LEDs for AT-8000GS Series DUPLEX Green Orange The p

Strany 258

Statistics Displays statistics about frames received/transmitted on the switch port. Basic Bridge Info Displays basic bridge info

Strany 259

Note - The current firmware version returns a 'noSuchName' value for the Port Number parameter. Local System Data Gen

Strany 260 -  Rate Limit

Authenticator PAE Info Standard Displays standard authenticator PAE information. Note - The current firmware version returns a &a

Strany 261

RMON Menu From the RMON menu you can view and edit the RMON MIB. Statistics Displays traffic statistics in the network segment atta

Strany 262

Left Bay Right Bay Numbering None None 1 to 25 (Port 25 is invalid and should be ignored.) None AT-XEM-1XP 1 to 26 (Port 25

Strany 263 - IGMP Menu

Note - The following parameters are not applicable to the AT-x900-24X series and should be ignored:  Ethernet Chip Set  Symbol

Strany 264 - VRRP Menu

Note - The following parameters are implemented as 'read-only':  Actor Operational Key  Partner Administrative Syste

Strany 265

AT-x900-24X Series (AlliedWare Plus) This section describes Device Manager menus and operations specific to the AT-x900-24X Series

Strany 266

AT-x900-24XT AT-x900-24XT-N Device Manager LEDs for the AT-x900-24X Series LED State Description PWR 1 Green Gray The Power

Strany 267

AlliedView™-EMS 4.0.1 Device Management Guide Page 339 of 411 Device Manager LEDs for the AT-x900-24X Series LED State Descrip

Strany 268

Physical Description Basic Info Displays the number of stack units. Module Info Displays module information for each unit in the s

Strany 269

Displays basic system information, including system name, location, contact and description. Note - Valid MIB Set values for the

Strany 270

Note - Device Manager does not handle objects of type OCTET STRING correctly. As a result, the Time and Date parameter will display

Strany 271

Note - The current firmware version does not allow the Board Bay parameter to be configured. Attempting to configure this paramet

Strany 272

Note - Configuring the Name and Key parameters to value 'NULL' will cause the device to restart intermittently. Note -

Strany 273

Next Boot Config Displays the full path of the configuration file to use the next time the device is rebooted. Default Config Di

Strany 274

Log Options Displays the log optionss on the device. Trigger Trigger Info Displays the trigger configuration information in the d

Strany 275

Note - For devices that is set to standalone mode, while the Reset operation is in progress, error "The error with 'Set&a

Strany 276

Note - The current firmware version returns the value 'NULL' for the Routing Protocol MIB parameter. Note - The followi

Strany 277

Note - The current firmware version does not allow the Status parameter to be set to 'active' as its value. Attempting

Strany 278

802.1p Device Capabilities Displays the device capabilities information. Traffic Class Displays the bridge traffic class and re

Strany 279

Note - Valid MIB Set values for the Physical Asset ID parameter should range from 0 to 32. However, the current firmware version

Strany 280

Port Menu From the Port menu, you can view and edit MIB information about the port. Utilization Displays the port's utilizatio

Strany 281

Error Statistics Displays error statistics. Note - The Ethernet Chipset parameter is not applicable to the AT-x900-24X series (Al

Strany 282 - AT-9924T/4SP

MAU Info Displays interface-related MAU information for the port. Note - The MAU Status and Default MAU Type parameters are imp

Strany 283

Note - The current firmware version does not allow the Actor Administrative Status and Partner Administrative Status parameter to b

Strany 284

SwitchBlade x908 This section describes Device Manager menus and operations specific to the SwitchBlade x908 Advanced Layer 3 Modu

Strany 285

Device Manager LEDs for the SwitchBlade x908 LED State Description PWR 1 Green Gray The Power Supply Unit (PSU) is installed a

Strany 286

Agent Menu From the Agent menu, you can view and edit the system information for the switch, or log into the CLI using Telnet. Syst

Strany 287

Contact Details / Memory Displays Contact Details information and Memory information of the device. Host Resources General System

Strany 288 - AT-x600-24Ts/XP

Host Info Displays the host information of the device. Hardware Info Total Expansion Modules Installed Displays the number of exp

Strany 289 - AT-x600-48Ts

Note - Configuring the Row Status parameter to 'destroy' as its value will result to an error message "The error occ

Strany 290

Mid-level Management Alarm Options Displays information about alarm options. Note - The current firmware version does not allow Al

Strany 291

Stack ID and Destination Stack ID parameters are incorrect. However, copy, move or delete operation will not be successful. SD C

Strany 292

NTP Info Displays the peer index's next available value. System Log Log Entries Displays information of the log entries on

Strany 293

Ping Probe History Table Displays ping probe history in performing ping operations. Note - The current firmware version returns

Strany 294

Note - Configuring Prefix Length parameter will result in the error message "The error occurred with 'Set' operation

Strany 295

TCP Statistics Displays TCP statistics. ICMP Statistics Displays ICMP statistics. DNS DNS Server Displays DNS server informat

Strany 296

Note - Values entered for the Aging Time parameter must be multiples of 10. Values that are not multiples of 10 will be automatical

Strany 297

History Control Table Displays the RMON History table. Note - Device Manager does not handle MIB table with Read-Create access co

Strany 298

 Received Bytes (HC)  Received Unicast Packets (HC)  Received Multicast Packets (HC)  Received Broadcast Packets (HC)  Tr

Strany 299

Note - The current firmware version does not allow the Protocol Migration parameter to be set to 'true'. Note - The cur

Strany 300

Note - The following parameters are not applicable to the SwitchBlade x908 series and should be ignored:  Capability Bits  Adv

Strany 301

SSH Tuning Displays the current number of the maximum number of authorized keys and its value after reset. Terminal Sessions Disp

Strany 302

Note - The current firmware version returns 'xemStk' value for the Active Hardware parameter regardless of whether the AT

Strany 303

Media Converters Converteon Series This section describes Device Manager menus and operations specific to the Converteon Series. T

Strany 304

Note - Using an SNMP v3 account that has a NO-READ VACM setting, a 'noSuchName' or 'noSuchObject' error may be

Strany 305

AT-CV5000 Device Manager LEDs for Converteon Chassis LED State Description PWR1 Green Gray Power supply 1 is installed and power

Strany 306 - AT-x900-12X Series

Note - Using an SNMP v3 account that has a NO-READ VACM setting, a 'noSuchName' or 'noSuchObject' error may be

Strany 307

Diagnostics Displays the device's software version, fan speed and fan temperature. Reset Resets the device. Telnet Starts

Strany 308

Note - AT-CV5M01: The current firmware version does not allow Device Manager to display the TX port values configured via Telnet.

Strany 309

Remote SFP Info Displays the remote SFP of the AT-CM2K0s and AT-CM70S line cards. Remote Port Statistics Info Displays the remot

Strany 310

Converteon Series Modules This section describes the modules supported by Device Manager. If modules are installed on the AT-CV500

Strany 311

LED State Description DUP Green Orange The port is operating in full-duplex mode. The port is operating in half-duplex mode. LT

Strany 312

LCLI Info Displays information about the device's Telnet sessions and SSH sessions if enabled or not. Note - Valid MIB Set va

Strany 313

AlliedView™-EMS 4.0.1 Device Management Guide Page 380 of 411 LED State Description ML Green Missing Link is enabled OAMB Gr

Strany 314

AlliedView™-EMS 4.0.1 Device Management Guide Page 381 of 411 LED State Description OAMB Green OAM Bypass is enabled OAMV Gr

Strany 315

AlliedView™-EMS 4.0.1 Device Management Guide Page 382 of 411 yet configured. Note - AT-CV5M01: The current firmware version doe

Strany 316

AlliedView™-EMS 4.0.1 Device Management Guide Page 383 of 411 LED State Description LT Green Link Test is enabled OAMB Green

Strany 317

AT-CV10x AT-CV101: 10/100TX to 100FX (ST, 2km, MM) AT-CV102: 10/100TX to 100FX (SC, 2km, MM) AT-CV102/1: 10/100TX to 100FX (SC

Strany 318

AT-CV1KSS 1000X to 1000X SFP LED State Description LT Green Link Test is enabled SML Green Smart Missing Link is enabled M

Strany 319

AT-MCF2000 Media Converter This section describes Device Manager menus and operations specific to the AT-MCF2000 Media Converter.

Strany 320 -  Remote Fault Received

AT-MCF2000 Device Manager LEDs for AT-MCF2000 Chassis LED State Description PWR1 Green Gray Power Supply 1 is installed and power

Strany 321

AlliedView™-EMS 4.0.1 Device Management Guide Page 388 of 411 Device Manager LEDs for AT-MCF2000 Chassis LED State Description

Strany 322

 Management Module Name  Management Module Type  Management Module 1.2V Status  Management Module 1.8V Status  Manage

Strany 323

Note - The current firmware version does not allow DST Start and DST End parameters to be configured when the DST Mode is set to

Strany 324

Note - Valid MIB Set values for the System Name, System Contact and System Location parameters are in the range [0-25] inclusive. H

Strany 325

Note - The current firmware version does not allow the Port Ingress Rate Limit and Port Egress Rate Limit parameters to be configur

Strany 326

AT-MCF2000 Modules This section describes the modules supported by Device Manager. If modules are installed on the AT-MCF2000 chas

Strany 327

AT-MCF2012LC 10/100Base-TX to 100BaseFX (LC, 2km, MM) LED State Description DUPLEX Green Orange The port is operating in full-d

Strany 328

AlliedView™-EMS 4.0.1 Device Management Guide Page 394 of 411 LED State Description LT Green Link Test is enabled ML Green

Strany 329

PowerBlade This section describes Device Manager menus and operations specific to the AT-PBC18 chassis. Topics: • Main Window •

Strany 330

Device Manager LEDs for AT-PBM02 Management Module LED State Description PWR Green Gray The main power supply is installed and p

Strany 331

Chassis Temperature Displays the actual temperature of the chassis. Power Info Displays power supply voltage information.

Strany 332

PowerBlade Modules This section describes the modules supported by Device Manager. If modules are installed on the PowerBlade cha

Strany 333

AT-PB100 Series Media Converter Modules PB101 PB102 PB103/1 PB103/2 LED State Description DUP Green Gray The media con

Strany 334

Port Menu ...

Strany 335

Error Log Displays information about errors registered to the system cache. Syslog Device Displays information about Syslog diag

Strany 336

AT-PB200 Series Switch Modules PB201 PB202 PB202/1 PB202/3 PB202/4 LED State Description DUP Green Gray The media c

Strany 337

AT-PB300 Series Media Converter Modules PB301 LED State Description DUP Green Gray The media converter is operating in full-dup

Strany 338

AT-PB1000 Series Media Converter Modules PB1001/1 PB1001/3 PB1005G LED State Description LT Green Link Test is enabled S

Strany 339

Expansion Gateways Port Interface Cards This section describes the Port Interface Cards supported in Device Manager. If one of th

Strany 340

AT-AR026 LED State Description DUPLEX Green The port is operating at full-duplex. Note - The four physical ports in this PIC a

Strany 341

Network Service Modules This section describes the Network Service Modules (NSMs) supported in Device Manager. If one of these NSM

Strany 342

LED State Description "DATA" Orange Gray For permanent circuits, HDLC packets are being exchanged between the switch

Strany 343

Uplink Modules This section describes the Uplink Modules that can be installed on a switch. If one of these uplink modules is inst

Strany 344

LED State Description DUPLEX Green Orange The port is operating at full-duplex. The port is operating at half-duplex. AT-STAC

Strany 345

AT-A61/AT-A61i (AT-XEM-12S) Note - There are no LEDs on these modules. AT-A62/AT-A62i (AT-XEM-12T) LED State Descr

Strany 346

Note - The current firmware version does not allow Mapping Type parameter to be set to 'invalid' or 'other' as

Strany 347

AlliedView™-EMS 4.0.1 Device Management Guide Page 410 of 411 AT-B1x LED State Description DUPLEX Green Orange The port is o

Strany 348

USA Headquarters | 19800 North Creek Parkway | Suite 200 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895 European Headquarters |

Strany 349

TFTP Displays configuration information about the TFTP. Note - The current firmware version does not allow the Send Config File

Strany 350

 Routing Protocol MIB  Destination Metric 2  Destination Metric 3  Destination Metric 4  Destination Metric 5 Note -

Strany 351

Cache Info Displays information about a collection of objects providing access to and control of a Domain Name System resolver&ap

Strany 352

result, Device Manager will display integer values of '1' and '2' instead of the value 'True' or &apo

Strany 353

IGMP Menu From the IGMP menu, you can view and edit Internet Group Management Protocol information such as IGMP queries and reports

Strany 354 - SwitchBlade x908

 Method List Name Level 6  Method List Name Level 7  Method List Name Level 8  Method List Name Level 9  Method List

Strany 355

Note - The current firmware version does not allow Administrative Controlled Directions parameter to be set to 'in' and

Strany 356

Displays the number of RADIUS Access-Response packets received from unknown addresses and the identifier of the RADIUS accounting c

Strany 357

AT-8948 ...

Strany 358

Secure Socket Layer Basic Info Displays basic SSL information. Certificate Generation Displays information about the generated key

Strany 359

History Control Table Displays the RMON History table. Alarm Table Displays the RMON Alarm table. Event Table Displays the RMON

Strany 360

Test Interface Displays port's test information. Note - The current firmware version does not allow the Test Set Type parame

Strany 361

valid value will result in the error "The error occurred with 'Set' operation. Error. bad value.". POE Port S

Strany 362

Displays basic information about port lock. Interfaces Range Displays information about port lock interfaces range. Note - The

Strany 363

Aggregator Port List Displays Link Aggregation Control information for every Aggregation Port associated with this device. Aggre

Strany 364

 Set Default Multicast Enable  Set Default Multicast Rate As a result, Device Manager will display integer values of '1&

Strany 365

AT-8000S Series This section describes Device Manager menus and operations specific to the AT-8000S Series. Topics: • Main Window

Strany 366

AT-8000S/24, AT-8000S/48 and POE Models The AT-8000S/24, AT-8000S/24POE, AT-8000S/48 and AT-8000S/48POE can be combined to form a

Strany 367

Device Manager LEDs for AT-8000S Series LED State Description PWR Green The switch is receiving power. STACK ID Orange Gray

Strany 368

Routing Menu ...

Strany 369

Device Info General Info Displays common management information. Active Software File Displays the currently available images on t

Strany 370

Software Packages Displays the device's software packages. Management Info General Management Displays common management info

Strany 371 - Converteon Series

General Tuning Displays general tuning information. Note - The current firmware version accepts values in the range [0-255] inclusi

Strany 372

Terminal Debug Mode Displays the terminal debug mode password. Note - The current firmware version does not allow the Terminal Deb

Strany 373

Note - Valid MIB Set values for the DST Offset parameter should range from 1 to 1440. However, the current firmware version allows

Strany 374

Syslog Device Displays information about Syslog diagnostic messages. Note - Device Manager does not handle 8-bit string parameters

Strany 375 - Status Menu

Note - The Backup Address parameter is not applicable to the AT-8000S module and should be ignored. Static Route Table Displays the

Strany 376

CIDR Route Number Displays the number of valid CIDR entries. Route Table Displays the CIDR routing tables. Note - The current fi

Strany 377 - OAM Menu

Cache Info Displays information about a collection of objects providing access to and control of a DNS resolver's cache. Neg

Strany 378 - Converteon Series Modules

Statistics Displays statistics about frames received/transmitted on the switch port. Basic Bridge Info Displays basic bridge info

Strany 379

Agent Menu...

Strany 380

Security Menu From the Security menu, you can view and edit different security and authentication protocols SSL, SSH, and port-base

Strany 381

Port-based Authentication PAE Port Info Displays the system level information for each port supported by the Port Access Entity. No

Strany 382

RADIUS Basic Info Displays basic RADIUS information. RADIUS Server Info Displays the IP address, UDP port number for authenticati

Strany 383

SSH Client Displays information about the user name ssh client will use and the value of the regenerated self key. Note - The curre

Strany 384

Event Table Displays the RMON Event table. Event Log Displays the RMON Event log. Port Menu From the Port menu, you can view and

Strany 385

Note - The current firmware version returns a "noSuchName" value for the following parameters:  Alignment Error Frames

Strany 386

Spanning Tree Info STP Standard Displays the port's spanning tree parameters. Additional Info Displays a list of information

Strany 387

Note - The current firmware version returns a "noSuchName" value for the Received Frames (HC) and Transmit Frames (HC) pa

Strany 388

Storm Control Protection Displays information about the storm control protection per port. Note - Only the Broadcast Enable and Mul

Strany 389

AT-8300GB Series This section describes Device Manager menus and operations specific to the AT-8300GB Series. Topics: • Main Win

Strany 390

AT-PB1000 Series Media Converter Modules... 402 EXPANSION GATEWA

Strany 391

Main Window AT-8326GB AlliedView™-EMS 4.0.1 Device Management Guide Page 80 of 411

Strany 392 - AT-MCF2000 Modules

The AT-8326GB supports up to 6 AT-8326GB stacked switches or any of the following mixed stack combinations of AT-8326GB and AT-8350

Strany 393 - AT-MCF2012LC/1

AlliedView™-EMS 4.0.1 Device Management Guide Page 82 of 411 Device Manager LEDs for AT-8300GB Series LED State Description DUP

Strany 394

DHCP Info Displays DHCP information including the DHCP System Group and DHCP Timer Group. Manager Address Info Displays the IP ad

Strany 395 - PowerBlade

Statistics Displays traffic statistics in the network segment attached to each port. History Control Table Displays the RMON Hist

Strany 396

Note - The Port Name parameter is not applicable to the AT-8300GB Series. Note - Valid MIB Set values for the Port State parameter

Strany 397

AT-8400 This section describes Device Manager menus and operations specific to the AT-8400 switch. Topics: • Main Window • Age

Strany 398 - PowerBlade Modules

Main Window AT-8400 Device Manager LEDs for AT-8401 Management Module LED State Description FAN A Green Gray FAN TRAY A is inst

Strany 399

AlliedView™-EMS 4.0.1 Device Management Guide Page 88 of 411 Device Manager LEDs for AT-8401 Management Module LED State Descri

Strany 400

Chassis Info Displays chassis information including the firmware information. Note -The current firmware version does not allow t

Strany 401

Basic Operations Device Manager's main window shows the main panel of the target device. It has both common and device-specif

Strany 402

Spanning Tree Info Displays spanning tree parameters such as spanning tree status and spanning tree version. Note - When setting

Strany 403 - Port Interface Cards

Note - Ports are numbered continuously from top to bottom, across all installed line cards, starting from the leftmost line card al

Strany 404

Displays port mirroring parameters and allows configuration of port mirroring state and port's source list. Note - Valid MI

Strany 405 - Network Service Modules

AT-8400 Line Cards This section describes the AT-8400 Line Cards supported by Device Manager. If line cards are installed on the A

Strany 406

AT-8412 AT-8412/MT AT-8412/SC LED State Description DUPLEX Green The port is operating in full-duplex. Note - The current f

Strany 407 - Uplink Modules

AT-8413 AT-8413GB/T LED State Description DUPLEX Green Orange The port is operating in full-duplex. The port is operating in ha

Strany 408

AT-8414 AT-8414/SC AT-8414/ST LED State Description DUPLEX Green Orange The port is operating in full-duplex. The port is op

Strany 409

AT-9000/24 This section describes Device Manager menus and operations specific to the AT-9000/24 switch. Topics: • Main Window

Strany 410

Note - The current firmware version does not allow Device Manager to detect the presence or absence of an SFP module in any of the

Strany 411 - 613-000201 Rev M

Reset Resets the switch. Telnet Starts a Telnet connection to the switch. WEB Browser Connects to the switch's HTTP server.

Komentáře k této Příručce

Žádné komentáře