Allied-telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT Uživatelský manuál Strana 243
- Strana / 411
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Port Menu
From the Port menu, you can view and edit MIB information about the port.
Utilization
Displays the port's utilization information.
Interface Info
Standard
Displays port statistics such as the number of packets received and transmitted on
the port, bytes received and transmitted on the port and port status. This table also
displays high-capacity port statistics including received and transmitted
unicast/multicast/broadcast packets on the port, link up/down trap and port speed.
Note - Valid MIB Set values for the Administration Status parameter are 'up' and
'down'. Attempting to set this parameter to any other value will result in the error
message: "The error occurred with 'Set' operation. Error: bad value."
Note - The current firmware version does not allow the Port Alias parameter to be
configured.
Note - Use SNMP v2c or v3 to view high capacity (HC) port parameter values.
Note - L3 Models: The current firmware version returns the value 'NULL' for the
Specific Media parameter.
Additional Info
Displays port statistics such as the number of frames received and transmitted on
the port, bytes received and transmitted on the port and port status.
Note - Use SNMP v2c or v3 to view this table.
Error Statistics
Displays error statistics.
Standard
Displays port error statistics such as error frames and collision frames. It also
displays deferred transmissions and ethernet chipset information.
Note - When multiple units of the AT-9400 are stacked together, and the master
switch is an AT-9424Ts or an AT-9424Ts/XP, the current firmware version returns
incorrect values for the Error Statistics parameter.
Note - L3 Models: The current firmware version returns the value 'NULL' for the
Ethernet Chip Set parameter.
AlliedView™-EMS 4.0.1 Device Management Guide Page 243 of 411
- AlliedView™-EMS 4.0.1 1
- DEVICE MANAGEMENT GUIDE 1
- TABLE OF CONTENTS 2
- Basic Operations 9
- Menu for stacked devices 10
- Port selection dialog box 11
- Port status colors 11
- LED status 11
- Utilization 12
- AT-8012M-QS 14
- AT-8016F/MT 14
- AT-8016F/SC 15
- AT-8016F/ST 15
- AT-8024 16
- AT-8024GB 16
- AT-8024M 17
- AT-8026FC 17
- AT-8026T 18
- AT-8088/MT 18
- • Expansion module ports 23
- AT-8000GS Series 31
- Destination Port Number 42
- Routing Protocol MIB 43
- Destination Metric 2 43
- Destination Metric 3 43
- Destination Metric 4 43
- Destination Metric 5 43
- Received Frames 48
- Transmitted Frames 48
- Received Octets 48
- Transmitted Octets 48
- Dampening Enable 53
- Filter BPDU 53
- Restricted Role 53
- Auto Edge Port 53
- Port Number 71
- AT-8300GB Series 79
- AT-8400 86
- Utilization 91
- Spanning Tree Info 91
- AT-8411 93
- AT-8412 94
- AT-8413 95
- AT-8414 96
- Port Menu 100
- 101
- Main Window 102
- Agent Menu 103
- Bridge Menu 104
- RMON Menu 104
- VLAN Menu 105
- AT-AR440S 112
- AT-AR441S 112
- Routing Menu 114
- ATM Menu 115
- ADSL Menu 116
- SHDSL Menu 116
- Frame Relay Menu 125
- Call List Menu 125
- LAN/WAN Menu 134
- Availability Menu 138
- Security Menu 139
- AT-8524M 144
- AT-8524POE 144
- egress-queue-0 151
- egress-queue-1 151
- egress-queue-2 151
- egress-queue-3 151
- Stacking Menu 153
- Expansion Module Notes 153
- LLDP Menu 176
- Rapier 16Fi/SC 198
- Rapier 24i 199
- Rapier 48i 199
- Rapier G6 200
- Rapier G6F-LX/SC 200
- SwitchBlade 221
- SwitchBlade Line Cards 228
- AT-9424T/POE 233
- AT-9424Ts 233
- AT-9424Ts/XP 234
- AT-9448T/SP 234
- Domain 255
- Authentication Key 255
- Default Metric 255
- Source IP Address 255
- Rate Limit 260
- IGMP Menu 263
- VRRP Menu 264
- AT-9924SP 282
- AT-9924T/4SP 282
- AT-x600-24Ts/XP 288
- AT-x600-48Ts 289
- AT-x900-12X Series 306
- Capability Bits 320
- Advertised Bits 320
- Received Bits 320
- Remote Fault Advertised 320
- Remote Fault Received 320
- SwitchBlade x908 354
- Media Converters 371
- Converteon Series 371
- Status Menu 375
- OAM Menu 377
- Converteon Series Modules 378
- AT-MCF2000 Modules 392
- AT-MCF2012LC 393
- AT-MCF2012LC/1 393
- PowerBlade 395
- PowerBlade Modules 398
- Expansion Gateways 403
- Port Interface Cards 403
- Network Service Modules 405
- Uplink Modules 407
- 613-000201 Rev M 411
Související produkty a manuály pro Počítačový hardware Allied-telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT
(38 stránky)© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.047 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce