Allied-telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT Uživatelský manuál stáhnout pdf (Strana 269)

100

101

Server Info

Displays information about servers.

Note - The current firmware version does not allow the Authentication Key

parameter to be configured.

Note - The only valid MIB Set value for the Row Status parameter is ‘destroy’.

Attempting to set this parameter to any other value will result in the error message:

”The error occurred with 'Set' operation. Error: bad value.”

Access Control List

Ethernet Info

Displays ACL mask of Ethernet information.

Note - The current firmware version does not allow the following parameters to be

configured:

 Filtered Ports

 Source MAC Address Mask

 Destination MAC Address Mask

Ethernet Rule

Displays ACL rule of Ethernet information.

Note - The current firmware version does not allow the following parameters to be

configured:

 VLAN

 Source MAC Address

 Destination MAC Address

 Ethernet Type

IP Info

Displays ACL mask of IP information.

Note - The current firmware version does not allow the following parameters to be

configured:

 Filtered Ports

 TCP/UDP Source Port Mask

 TCP/UDP Destination Port Mask

 Protocol ID Mask

IP Rule

Displays ACL rule of IP information.

Note - The current firmware version does not allow the VLAN and User Mask

parameters to be configured.

AlliedView™-EMS 4.0.1 Device Management Guide Page 269 of 411

1 2 ... 264 265 266 267 268 269 270 271 272 273 274 ... 410 411

Komentáře k této Příručce

Žádné komentáře

Allied-telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT Uživatelský manuál Strana 269

Komentáře k této Příručce

Související produkty a manuály pro Počítačový hardware Allied-telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT