Allied-telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT Uživatelský manuál stáhnout pdf (Strana 219)

100

101

Note - Although the current firmware allows the Administration Status parameter to

be set to 'testing', the value 'testing' is not a valid MIB Set value.

Note - The Promiscuous Mode parameter is implemented as 'read-only'.

Detail Info

Duplex Mode

Displays the duplex mode of the ports.

Bandwith Limits

Displays bandwidth limits of the switch ports.

Error Statistics

Displays error statistics.

Note - The following parameters are not applicable to AT-Rapier48w and should be

ignored:

 Ethernet Chip Set

 Symbol Errors

 Duplex Status

Spanning Tree Info

Displays the port's spanning tree parameters.

MAU Info

Displays interface-related MAU information for the port.

Note - The MAU Type List Bits and HC False Carriers parameters are not applicable

to the AT-Rapier48w and should be ignored.

Note - The MAU Status and Default MAU Type parameters are implemented as

'read-only'.

MAU Negotiation Info

Displays the MAU's auto-negotiation settings and its status.

Note - The following parameters are not applicable to the AT-Rapier48w and should

be ignored:

 Capability Bits

 Advertised Bits

 Received Bits

 Remote Fault Advertised

 Remote Fault Received

Note - The Administration Status, Advertised Negotiation Capability and Restart

parameters are implemented as 'read-only'.

AlliedView™-EMS 4.0.1 Device Management Guide Page 219 of 411

1 2 ... 214 215 216 217 218 219 220 221 222 223 224 ... 410 411

Komentáře k této Příručce

Žádné komentáře

Allied-telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT Uživatelský manuál Strana 219

Komentáře k této Příručce

Související produkty a manuály pro Počítačový hardware Allied-telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT