Allied-telesis AT-S94 CLI (AT-8000S Series) Uživatelský manuál stáhnout pdf (Strana 61)

100

101

Address Table Commands

Page 60

no port security max

Parameters

•

max-addr— Maximum number of addresses that can be learned by the port.

(Range: 1-128)

Default Configuration

The default setting is 1 address.

Command Mode

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

This command is only relevant in dynamic learning modes.

Example

The following example configures the maximum number of addresses that are learned on port 1/e7 before it is

locked is set to 20.

port security routed secure-address

The port security routed secure-address Interface Configuration (Ethernet, port-channel) mode command adds

a MAC-layer secure address to a routed port. Use the no form of this command to delete a MAC address.

Syntax

port security routed secure-address mac-address

no port security routed secure-address mac-address

Parameters

•

mac-address — A valid MAC address.

Default Configuration

No addresses are defined.

Command Mode

Interface Configuration (Ethernet, port-channel) mode. Cannot be configured for a range of interfaces (range

context).

User Guidelines

•

The command enables adding secure MAC addresses to a routed port in port security mode.

• The command is available when the port is a routed port and in port security mode.

• The address is deleted if the port exits the security mode or is not a routed port.

console(config)#

interface ethernet

1/e7

console(config-if)#

port security max

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 401 402

Komentáře k této Příručce

Žádné komentáře

Allied-telesis AT-S94 CLI (AT-8000S Series) Uživatelský manuál Strana 61

Komentáře k této Příručce

Související produkty a manuály pro Počítačový hardware Allied-telesis AT-S94 CLI (AT-8000S Series)