Allied-telesis AT-S94 CLI (AT-8000S Series) Uživatelský manuál stáhnout pdf (Strana 379)

802.1x Commands

Page 378

Example

The following example sets the number of times that the device sends an EAP-request/identity frame to 6 .

dot1x timeout supp-timeout

The dot1x timeout supp-timeout Interface Configuration mode command sets the time for the retransmission of

an Extensible Authentication Protocol (EAP)-request frame to the client. Use the no form of this command to

return to the default configuration.

Syntax

dot1x timeout supp-timeout seconds

no dot1x timeout supp-timeout

Parameters

•

seconds — Time in seconds that the device waits for a response to an EAP-request frame from the client

before resending the request. (Range: 1- 65535 seconds)

Default Configuration

Default timeout period is 30 seconds.

Command Mode

Interface configuration (Ethernet) mode

User Guidelines

The default value of this command should be changed only to adjust for unusual circumstances, such as

unreliable links or specific behavioral problems with certain clients. and authentication servers

Example

The following example sets the timeout period before retransmitting an EAP-request frame to the client to 3600

seconds.

dot1x timeout server-timeout

The dot1x timeout server-timeout Interface Configuration mode command sets the time that the device waits for

a response from the authentication server. Use the no form of this command to return to the default configuration.

Syntax

dot1x timeout server-timeout seconds

no dot1x timeout server-timeout

console(config)#

interface ethernet

1/e16

console(config-if)#

dot1x max-req

console(config-if)

dot1x timeout supp-timeout

3600

1 2 ... 374 375 376 377 378 379 380 381 382 383 384 ... 401 402

Žádné komentáře

Allied-telesis AT-S94 CLI (AT-8000S Series) Uživatelský manuál Strana 379