Allied-telesis AT-S94 CLI (AT-8000S Series) Uživatelský manuál stáhnout pdf (Strana 352)

100

101

Page 351

Allied Telesis

AT-8000S-S94-3.0 Command Line Interface User’s Guide

User Guidelines

There are no user guidelines for this command.

Example

The following example configures the PVID for Ethernet port 1/e16, when the interface is in general mode.

switchport general ingress-filtering disable

The switchport general ingress-filtering disable Interface Configuration mode command disables the ingress

filtering of a port. Use the no form of this command to enable the ingress filtering of a port.

Syntax

switchport general ingress-filtering disable

no switchport general ingress-filtering disable

Parameters

This command has no arguments or keywords.

Default Configuration

Ingress filtering is enabled.

Command Mode

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

There are no user guidelines for this command.

Example

The following example disables the ingress filtering of a port.

switchport general acceptable-frame-type tagged-only

The switchport general acceptable-frame-type tagged-only Interface Configuration mode command discards

untagged frames at ingress. Use the no form of this command to return to the default configuration.

Syntax

switchport general acceptable-frame-type tagged-only

no switchport general acceptable-frame-type tagged-only

Parameters

This command has no arguments or keywords.

console(config)# interface ethernet 1/e16

console(config-if)# switchport general pvid 234

console(config)# switchport general ingress-filtering disable

1 2 ... 347 348 349 350 351 352 353 354 355 356 357 ... 401 402

Komentáře k této Příručce

Žádné komentáře

Allied-telesis AT-S94 CLI (AT-8000S Series) Uživatelský manuál Strana 352

Komentáře k této Příručce

Související produkty a manuály pro Počítačový hardware Allied-telesis AT-S94 CLI (AT-8000S Series)