Allied-telesis AT-S94 CLI (AT-8000S Series) Uživatelský manuál stáhnout pdf (Strana 210)

100

101

Page 209

Allied Telesis

AT-8000S-S94-3.0 Command Line Interface User’s Guide

Default Configuration

This command has no default configuration.

Command Mode

Interface Configuration (Ethernet) mode

User Guidelines

There are no user guidelines for this command.

Example

The following example configures a description to an IP-phone to a powered device connected to Ethernet

interface 1/e1.

power inline priority

The power inline priority Interface Configuration (Ethernet) mode command configures the inline power

management priority of the interface. Use the no form of this command to return to the default configuration.

Syntax

power inline priority {critical | high | low}

no power inline priority

Parameters

•

critical — Indicates that operating the powered device is critical.

• high — Indicates that operating the powered device has high priority.

• low—Indicates that operating the powered device has low priority.

Default Configuration

The default setting is low priority.

Command Mode

Interface Configuration (Ethernet) mode

User Guidelines

There are no user guidelines for this command.

Example

The following example configures the device connected to Ethernet interface 1/e1 as a high-priority powered

device.

console(config)# interface ethernet 1/e1

console(config-if)#

power inline powered-device

IP-phone

console(config)# interface ethernet 1/e1

console(config-if)#

power inline priority high

1 2 ... 205 206 207 208 209 210 211 212 213 214 215 ... 401 402

Komentáře k této Příručce

Žádné komentáře

Allied-telesis AT-S94 CLI (AT-8000S Series) Uživatelský manuál Strana 210

Komentáře k této Příručce

Související produkty a manuály pro Počítačový hardware Allied-telesis AT-S94 CLI (AT-8000S Series)