Allied-telesis AT-S94 CLI (AT-8000S Series) Uživatelský manuál stáhnout pdf (Strana 205)

100

101

Port Channel Commands

Page 204

Command Mode

Global Configuration mode

User Guidelines

Commands under the interface range context are executed independently on each interface in the range.

Example

The following example groups port-channels 1, 2 and 6 to receive the same command.

channel-group

The channel-group Interface Configuration (Ethernet) mode command associates a port with a port-channel. Use

the no form of this command to remove a port from a port-channel.

Syntax

channel-group port-channel-number

no channel-group

Parameters

•

port-channel-number — Specifies the number of the valid port-channel for the current port to join.

Default Configuration

The port is not assigned to a port-channel.

Command Mode

Interface Configuration (Ethernet) mode

User Guidelines

There are no user guidelines for this command.

Example

The following example forces port 1/e1 to join port-channel 1.

show interfaces port-channel

The show interfaces port-channel Privileged EXEC mode command displays port-channel information.

Syntax

show interfaces port-channel [port-channel-number]

console(config)#

interface range port-channel

1-2,6

console(config)#

interface ethernet

1/e1

console(config-if)#

channel-group

mode on

01-Oct-2008 09:47:14 %LINK-W-Down: ch1

console(config-if)#

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 401 402

Komentáře k této Příručce

Žádné komentáře

Allied-telesis AT-S94 CLI (AT-8000S Series) Uživatelský manuál Strana 205

Komentáře k této Příručce

Související produkty a manuály pro Počítačový hardware Allied-telesis AT-S94 CLI (AT-8000S Series)