Allied-telesis AlliedView-EMS 4.0.3 Device-Management Uživatelský manuál Strana 376

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 468
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 375
AlliedView™-EMS 4.0.3 Device Management Guide Page 376 of 468
Bandwidth Limits
Displays bandwidth limits of the switch ports.
Note - The current firmware version does not allow the Ingress Limit
parameter to be configured.
Error Statistics
Displays error statistics.
Note - The following parameters are not applicable to the AT-x900-24X series and
should be ignored:
Ethernet Chip Set
Symbol Errors
Duplex Status
Rate Control Ability
Rate Control Status
Spanning Tree Info
Displays the port's spanning tree parameters.
Note - The Path Cost Contribution parameter is not applicable to the AT-x900-24X
series and should be ignored.
Note - Valid MIB Set values for the Port Path Cost parameter is in the range [1-
65535] inclusive.
MAU Info
Displays interface-related MAU information for the port.
Note - The MAU Type List Bits and HC False Carriers parameters are not applicable
to the AT-x900-24X series and should be ignored.
Note - The MAU Status and Default MAU Type parameters are implemented as
'read-only'.
MAU Negotiation Info
Displays the MAU's auto-negotiation settings and its status.
Note - The following parameters are not applicable to the AT-x900-24X series and
should be ignored:
Capability Bits
Advertised Bits
Received Bits
Remote Fault Advertised
Remote Fault Received
Zobrazit stránku 375
1 2 ... 371 372 373 374 375 376 377 378 379 380 381 ... 467 468

Komentáře k této Příručce

Žádné komentáře