Allied-telesis AlliedView-EMS 4.0.3 Device-Management Uživatelský manuál Strana 156
- Strana / 468
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
AlliedView™-EMS 4.0.3 Device Management Guide Page 156 of 468
ISDN
Call Details
Displays ISDN call information such as ISDN number and call direction for
active calls.
Note - The Remote Call parameter does not allow input values that contain
hyphens.
Note - If the In CLI (Calling Line Info) Search parameter is set to 'list', the In
CLI (Calling Line Info) List Check parameter gives the index of the CLI list to
search. The value of CLI list indices ranges from 1 to 100. The value 0 is
returned if the In CLI (Calling Line Info) Search parameter is not set to 'list'.
When the In CLI (Calling Line Info) List Check parameter is set to 0, the In
CLI (Calling Line Info) Search parameter is internally set to 'off'. Subsequently
setting it to a non-zero value will set the In CLI (Calling Line Info) Search
parameter to 'list'. Note that when using the command line interface, CLI List
indices range from 0 to 99, but when using Device Manager, they range from
1 to 100. This is because SNMP will not allow a table index to have the value
0, and the command line usage of indices from 0 to 99 is too well established
to change.
Note - If the In CLI (Calling Line Info) Check parameter is set to 'present' or
'required', the In CLI (Calling Line Info) Check List parameter gives the index
of the CLI list to check against. The value of CLI list indices ranges from 1 to
100. The value 0 means that no list to check against is defined and the check
immediately fails. Note that when using the command line interface, CLI list
indices range from 0 to 99, but when using Device Manager, they range from
1 to 100. This is because SNMP will not allow a table index to have the value
0, and the command line usage of indices from 0 to 99 is too well established
to change.
Note - The PPP Template parameter specifies the PPP template to use when
creating dynamic PPP interfaces for calls generated. The value 33 represents
a default PPP template while the values 1 to 32 represent PPP templates that
are currently defined in the router. Note that when using the command line
interface, PPP template indices range from 0 to 31, but when using Device
Manager, they range from 1 to 32. This is because SNMP will not allow a
table index to have the value 0.
CLI List
Displays the Calling Line Information list.
Active Calls
Displays information about currently active ISDN calls.
Call Log
Displays the call logs.
- AlliedView™-EMS 4.0.3 1
- DEVICE MANAGEMENT GUIDE 1
- TABLE OF CONTENTS 2
- Basic Operations 9
- Menu for stacked devices 10
- Port selection dialog box 11
- Port status colors 11
- LED status 11
- Utilization 12
- AT-8012M-QS 14
- AT-8016F/MT 14
- AT-8016F/SC 15
- AT-8016F/ST 15
- AT-8024 16
- AT-8024GB 16
- AT-8024M 17
- AT-8026FC 17
- AT-8026T 18
- AT-8088/MT 18
- • Expansion module ports 23
- AT-8000GS Series 32
- • Service Tag 35
- • Manufacturer 35
- • Received Octets 56
- • Transmitted Octets 56
- • Received Frames 56
- • Transmitted Frames 56
- • Rate Type 94
- • Unkown Unicast Rate 94
- • Unkown Multicast Rate 94
- • Multicast Rate 94
- AT-8300GB Series 95
- Port Menu 100
- Stacking Menu 101
- Main Window 102
- Agent Menu 103
- Bridge Menu 104
- RMON Menu 105
- AT-8411 108
- AT-8412 109
- AT-8413 109
- AT-8414 110
- 115
- Routing Menu 119
- VLAN Menu 126
- AT-AR440S 133
- AT-AR441S 133
- ATM Menu 136
- ADSL Menu 137
- SHDSL Menu 137
- Frame Relay Menu 141
- Call List Menu 141
- LAN/WAN Menu 155
- Availability Menu 159
- Security Menu 160
- AT-8524M 166
- AT-8524POE 166
- • egress-queue-0 173
- • egress-queue-1 173
- • egress-queue-2 173
- • egress-queue-3 173
- Expansion Module Notes 176
- LLDP Menu 198
- Rapier 16Fi/SC 223
- Rapier 24i 223
- Rapier 48i 224
- Rapier G6 224
- Rapier G6F-LX/SC 225
- Rapier G6F-SX/SC 225
- AT-Rapier 48w 230
- SwitchBlade 246
- SwitchBlade Line Cards 253
- AT-9424T/POE 258
- AT-9424Ts 258
- AT-9424Ts/XP 259
- AT-9448T/SP 259
- • Repeating Start 278
- • Repeating End 278
- • Annual Start 278
- • Annual End 278
- • Rate Limit 286
- IGMP Menu 289
- VRRP Menu 290
- AT-9924SP 307
- AT-9924T/4SP 307
- AT-x600-24Ts/XP 313
- AT-x600-24Ts/POE 313
- AT-x600-24Ts/POE+ 314
- AT-x600-48Ts 314
- POE Menu 326
- • Bit 1 - Power Via MDI 331
- • Bit 2 - Link Aggregation 331
- • Bit 3 - Max Frame Size 331
- • Fallback Config Status 337
- • Fallback Config Filename 337
- • Bit 0 - Port Description 351
- • Bit 1 - System Name 351
- • Capability Bits 361
- • Advertised Bits 361
- • Received Bits 361
- • Remote Fault Advertised 361
- • Remote Fault Received 361
- • Destination Metric 2 389
- • Destination Metric 3 389
- • Destination Metric 4 389
- • Destination Metric 5 389
- • Row Status 389
- Status Menu 431
- OAM Menu 433
- Converteon Series Modules 435
- AT-MCF2000 Media Converter 443
- • Management Port Speed 448
- • Management Port MDIX 448
- AT-MCF2000 Modules 449
- AT-MCF2012LC 450
- AT-MCF2012LC/1 450
- PowerBlade Modules 455
- Port Interface Cards 460
- Network Service Modules 462
- Uplink Modules 464
Související produkty a manuály pro Počítačový hardware Allied-telesis AlliedView-EMS 4.0.3 Device-Management
Počítačový hardware Allied-telesis SwitchBlade 4000 Series Switch Hardware Reference Uživatelský manuál
(64 stránky)
(64 stránky)
Počítačový hardware Allied-telesis Broadcom Advanced Control Suite 3 Uživatelský manuál
(80 stránky)
(80 stránky)
Počítačový hardware Allied-telesis AlliedView-EMS 4.0.2 VLAN-Manager Uživatelský manuál
(77 stránky)
(77 stránky)
Počítačový hardware Allied-telesis AlliedView-EMS 4.0.2 INSTALLATION Uživatelský manuál
(31 stránky)
(31 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.054 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce