Allied Telesis AT-SBX81XS6 Instalační příručka Strana 71

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 314
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 70
SwitchBlade x8112 Chassis Switch and AT-SBx81CFC960 Card Installation Guide
Section I: Hardware Overview 71
NET MGMT Port
The NET MGMT port is a standard 10/100/1000Base-T Ethernet port. You
may use it as an alternative to the ports on the Ethernet line cards for
support of the features in Table 19. You may connect the port to a router,
switch, media converter, workstation, server, or other network device.
The controller card uses the port as a standard network link for data
reception and transmission. It is used only by the controller card and
cannot be accessed from the line cards in the unit.
When the controller card performs a feature in Table 19, it establishes a
data link with the corresponding network device using either the NET
MGMT port or a port on an Ethernet line card. For example, when you
manage the switch remotely using its Telnet server, the data link between
the Telnet client on your workstation and the server on the controller card
is established either on the NET MGMT port or a port on an Ethernet line
card, wherever the Telnet client is located.
You are not required to use the NET MGMT to use the features in
Table 19. The controller card can communicate with network devices,
such as Telnet clients, FTP server, and SNTP server, over the ports on the
Ethernet line cards.
For instructions on how to configure the NET MGMT port, refer to the
Software Reference for SwitchBlade x8100 Series Switches.
Table 19. Features that Use the NET MGMT Port
Feature Description
Ping Used to test the NET MGMT port
for network connectivity.
FTP client Used with an FTP server on your
network to download files to or
upload files from the controller
card.
RADIUS client Used for remote management
authentication and 802.1x port-
based network access control.
RMON with SNMP Used with the RMON portion of
the MIB tree on an SNMP
workstation to remotely monitor
the switch.
Secure Shell server Used to remotely manage the
chassis with a Secure Shell client.
Zobrazit stránku 70
1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 313 314

Komentáře k této Příručce

Žádné komentáře