Allied Telesis AT-SBX81XS6 Instalační příručka Strana 153

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 314
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 152
SwitchBlade x8112 Chassis Switch and AT-SBx81CFC960 Card Installation Guide
Section II: Installing the Chassis 153
6. Connect the fiber optic cable to the port on the transceiver, as shown
in Figure 91. The connector should snap into the port.
Figure 91. Attaching a Fiber Optic Cable to an SFP+ Transceiver in the
AT-SBx81XS6 Line Card
7. Repeat this procedure to install additional SFP plus transceivers in the
AT-SBx81XS6 Line Cards.
After installing and cabling the SFP+ transceivers, do one of the following:
To install and cable additional transceivers, go to the appropriate
section in this chapter for instructions.
After cabling all the ports in the chassis, go to Chapter 9,
“Powering On the Chassis” on page 163.
Zobrazit stránku 152
1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 313 314

Komentáře k této Příručce

Žádné komentáře