Allied-telesis AT-S95 CLI (AT-8000GS Series) Uživatelský manuál stáhnout pdf (Strana 118)

100

101

Page 118

Allied Telesis

AT-8000GS Command Line Interface User’s Guide

User Guidelines

There are no user guidelines for this command.

Example

port storm-control include-multicast (IC)

The port storm-control include-multicast Interface Configuration (Ethernet) mode command counts Multicast

packets in Broadcast storm control. Use the no form of this command to disable counting Multicast packets.

Syntax

port storm-control include-multicast

no port storm-control include-multicast

Parameters

This command has no arguments or keywords.

Default Configuration

Multicast packets are not counted.

Command Modes

Interface Configuration (Ethernet) mode

User Guidelines

This command is relevant to FE devices only.

To control Multicasts storms, use the port storm-control broadcast enable and port storm-control broadcast

rate commands.

Example

The following example enables counting Broadcast and Multicast packets on Ethernet port 2/g3.

port storm-control broadcast enable

The port storm-control broadcast enable Interface Configuration (Ethernet) mode command enables Broadcast

storm control. Use the no form of this command to disable Broadcast storm control.

Syntax

port storm-control broadcast enable

no port storm-control broadcast enable

Console#

show system flowcontrol

console(config)#

interface ethernet

2/g3

console(config-if)#

port storm-control include-multicast

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 396 397

Komentáře k této Příručce

Žádné komentáře

Allied-telesis AT-S95 CLI (AT-8000GS Series) Uživatelský manuál Strana 118

Komentáře k této Příručce

Související produkty a manuály pro Počítačový hardware Allied-telesis AT-S95 CLI (AT-8000GS Series)