Allied-telesis AT-S95 CLI (AT-8000GS Series) Uživatelský manuál Strana 108

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 397
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 107
Page 108
Allied Telesis
AT-8000GS Command Line Interface Users Guide
Example
In the following example, automatic crossover is enabled on port 1/g5.
back-pressure
The back-pressure Interface Configuration (Ethernet, port-channel) mode command enables back pressure on a
given interface. Use the no form of this command to disable back pressure.
Syntax
back-pressure
no back-pressure
Parameters
This command has no arguments or keywords.
Default Configuration
Back pressure is enabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
In the following example back pressure is enabled on port 1/g5.
port jumbo-frame
The port jumbo-frame Global Configuration mode command enables jumbo frames for the device. Use the no
form of this command to disable it.
Syntax
port jumbo-frame
no port jumbo-frame
Default Configuration
Disabled.
console(config)#
interface ethernet
1/g5
console(config-if)#
mdix
auto
console(config)#
interface ethernet
1/g5
console(config-if)# back-pressure
Zobrazit stránku 107
1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 396 397

Komentáře k této Příručce

Žádné komentáře