Allied-telesis AT-SBx81CFC960 Uživatelský manuál Strana 192

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 322
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 191
Chapter 9: Powering On the Chassis
192 Section II: Installing the Chassis
Figure 135. Connecting the Negative (-) Power Wire with a Straight
Terminal
Warning
Check to see if there are any exposed copper strands coming from
the installed wires. When this installation is done correctly there
should be no exposed copper wire strands extending from the
terminal block. Any exposed wiring can conduct harmful levels of
electricity to persons touching the wires. E12
8. Slide the plastic cover to the left and lightly tighten the two screws with
a #1 Phillips-head screwdriver to secure the cover. See Figure 136 on
page 193. You might need to slightly lift the locking handle to access
the bottom screw.
Caution
Do not over tighten the screws or you may crack or break the plastic
cover.
Zobrazit stránku 191
1 2 ... 187 188 189 190 191 192 193 194 195 196 197 ... 321 322

Komentáře k této Příručce

Žádné komentáře