Allied-telesis AT-SBx81CFC960 Uživatelský manuál Strana 168

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 322
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 167
Chapter 8: Installing the Transceivers and Cabling the Ports
168 Section II: Installing the Chassis
2. If you are installing the SFP+ transceiver in slot 1 or 3, orient it with the
handle on top, as shown in Figure 108. To install it in slot 2 or 4, orient
it with the handle on the bottom.
Figure 108. Handle on an SFP+ Transceiver
3. Slide the transceiver into the slot until it clicks into place, as shown in
Figure 109.
Figure 109. Installing an SFP+ Transceiver in the AT-SBx81CFC960
Controller Fabric Card
Note
If you are ready to attach the fiber optic cable to the transceiver,
continue with the next step. Otherwise, repeat steps 1 to 3 to install
additional SFP+ transceivers in the card.
4. Remove the protective cover from the STP+ transceiver, as shown in
Figure 110 on page 169.
Handle
Zobrazit stránku 167
1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 321 322

Komentáře k této Příručce

Žádné komentáře