Allied-telesis AT-S95 CLI Uživatelský manuál Strana 34

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 348
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 33
Page 22
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface User’s Guide
show access-lists
The show access-lists Privileged EXEC mode command displays Access Control Lists (ACLs) configured on the
switch.
Syntax
show access-lists [name]
Parameters
name — Name of the ACL.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays access lists.
show interfaces access-lists
The show interfaces access-lists Privileged EXEC mode command displays access lists applied on interfaces.
Syntax
show interfaces access-lists [ ethernet interface | vlan vlan-id | port-channel port-channel-number ]
Parameters
vlan-id— Specifies the ID of the VLAN.
interface The full syntax is: unit/port.
port-channel-number — Valid port-channel Index.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
Console#
show
access-lists
IP access list ACL1
permit ip host 172.30.40.1 any
permit rsvp host 172.30.8.8 any
Zobrazit stránku 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 347 348

Komentáře k této Příručce

Žádné komentáře