Allied-telesis AT-S25 Uživatelský manuál stáhnout pdf (Strana 29)

AT-S25 Management Software User’s Guide

Telnet Management Interface

Any management workstation on your network that has the Telnet

application protocol can be used to manage an AT-8316F or an AT-8324

Switch. This type of management interface is referred to in this guide as

a remote management interface because you do not have to be in the

wiring closet where the switch you wish to manage is located. You could

manage the switch from any workstation on the network that has the

application protocol.

To establish a Telnet management interface with a switch, you must

assign an IP address to that switch.

Note

For instructions on how to start a Telnet management interface,

refer to Starting a Telnet Management Interface on page 39.

A Telnet management interface gives you complete access to all of a

switch’s operating parameters. You could perform nearly all the same

functions from a Telnet management interface as you could from a local

management interface.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 276 277

Žádné komentáře

Allied-telesis AT-S25 Uživatelský manuál Strana 29