Allied-telesis AT-WA7400 Uživatelský manuál Strana 42

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 62
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 41
Chapter 2: Installation
40
Running KickStart to Find Access Points on
the Network
KickStart is an easy-to-use utility for discovering and identifying
new AT-WA7400 Wireless Access Points. KickStart scans the
network looking for access points, displays ID details on those it
finds, and provides access to the AT-WA7400 Management
Software.
Note
KickStart (and the other AT-WA7400 tools) recognizes and
configures only AT-WA7400 Wireless Access Points. KickStart
does not find or configure non-AT-WA7400 Wireless Access
Points and will not find any other devices.
Note
Run KickStart only in the subnet of the internal network (SSID).
Note
KickStart finds only those access points that have IP addresses.
IP addresses are dynamically assigned to access points if you
have a DHCP server running on the network. If you deploy the
access point on a network with no DHCP server, the default
static IP address (192.168.1.230) is used.
Caution
Use caution with non-DHCP enabled networks: Do not
deploy more than one new access point on a non-DHCP
network because they will use the same default static IP
addresses and conflict with each other.
Zobrazit stránku 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 61 62

Komentáře k této Příručce

Žádné komentáře