Allied-telesis AT-S97 Uživatelský manuál stáhnout pdf (Strana 234)

Chapter 14: Diagnostics Commands

234

Examples

This command displays information about the management module in a

chassis with the ID 0:

diagnostics show module id=0/m

This command displays information about the media converter module in

slot 2 of a chassis with the ID 1:

diagnostics show module id=1/2

SN Displays the serial number of a module.

HW Rev Displays the hardware revision levels of the component.

Software Version The version number of the AT-S85 or AT-S97 Management

Software.

Voltages Displays the module’s input voltages.

Temperature Displays the current temperature of the module.

Temperature Threshold Displays the temperature threshold of a module. The

management module logs an event in the event log if the

threshold is exceeded, to warn of possible excessive

temperature in the wiring closet or chassis. Refer to “SYSTEM

SET MODULE” on page 89 for instructions on setting a

module’s temperature threshold.

Table 28. DIAGNOSTICS SHOW CHASSIS EEPROM Command

Parameter Description

1 2 ... 229 230 231 232 233 234 235 236 237 238 239 ... 247 248

Žádné komentáře

Allied-telesis AT-S97 Uživatelský manuál Strana 234