Allied-telesis AT-S97 Uživatelský manuál Strana 16

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 248
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 15
Chapter 1: Starting a Management Session
16
Management Overview
The discussions in this section review the basic characteristics of the
management software for the AT-MCF2000 Media Converter Series.
AT-S85 and
AT-S97
Management
Software
The modules in the AT-MCF2000 Series use two different operating
systems. The AT-MCF2000M Management Module uses the AT-S97
Management Software and the AT-MCF2012LC, AT-MCF2012LC/1 and
AT-MCF2032SP Media Converter Modules use the AT-S85 Management
Software.
All of your commands must be entered through the AT-S97 Management
Software on the management module. Commands intended for a media
converter module are automatically transferred by the management
module to the appropriate module in the chassis or stack.
Features of the
AT-S97
Management
Software
Here are the functions that you can perform using the AT-MCF2000M
Management Module and Version 3.0.0 of the AT-S97 Management
Software:
Set the operating parameters on the twisted pair and fiber optic ports
of the media converter channels, including:
Auto-Negotiation
Speed
Duplex mode
MDI/MDI-X configuration
Change a channel’s operating mode. The operating modes are listed
here:
MissingLink™
Smart MissingLink
Link Test
Implement rate limits on the ingress and egress packets on the ports of
the media converter channels.
Configure the module’s Network Time Protocol (NTP) client to set the
system’s date and time from a NTP server on your network or the
Internet.
Create a stack of enclosures of up to sixteen media converter modules
so that you can manage the modules from one management module.
Manage the modules locally using the RS-232 Terminal Port or
remotely using a Telnet or SSH client.
Manage the modules remotely using Simple Network Management
Protocol (SNMP).
Zobrazit stránku 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 247 248

Komentáře k této Příručce

Žádné komentáře