Allied-telesis AT-S106 Uživatelský manuál stáhnout pdf (Strana 140)

Chapter 12: Static Multicast MAC Address

140

Modifying a Static Multicast Address

To modify the port assignment of a multicast MAC address in the MAC

address table, do the following procedure:

1. From the main menu on the left side of the page, select the Bridge

folder.

1. From the Bridge folder, select Static Multicast.

The Static Multicast Address Table Page is displayed. See Figure 42

on page 138.

2. Select modify next to the static MAC address that you want to modify.

The Modify Static Multicast Address Page is displayed. See Figure 43.

Figure 43. Modify Static Multicast Address Page

3. In the Group Member row, select the ports that you want to include in

the group MAC address.

Selected ports are indicated with a check mark. The switch can have a

maximum limit of 256 static multicast addresses.

4. Click Apply.

Note

To restore the original group member ports, click Restore.

5. From the main menu on the left side of the page, select Save

Configuration to Flash to permanently save your changes.

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 225 226

Žádné komentáře

Allied-telesis AT-S106 Uživatelský manuál Strana 140