Allied Telesis AT-S94 Uživatelská příručka Strana 84

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 254
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 83
Page 84
Allied Telesis
AT-S94 Management Software Web Browser Interface User’s Guide
Destination
IPv4 Address — Matches the destination port IPv4 address to which packets are addressed to the ACE.
Mask — Defines the destination IP address wildcard mask. Wildcard masks specify which bits are used
and which bits are ignored. A wild card mask of 255.255.255.255 indicates that no bit is important. A
wildcard of 0.0.0.0 indicates that all the bits are important.
Flag Set — Sets the indicated TCP flag that can be triggered. The possible values are:
Urg, Ack, Psh, Rst, Syn, and Fin.
The indicated value setting is represented by one of the following:
1 — Flag is set.
0 — Flag is disabled.
x — Don’t care.
ICMP Type — Filters packets by ICMP message type. The field values are 0-255.
ICMP Code — Indicates and ICMP message code for filtering ICMP packets. ICMP packets that are filtered
by ICMP message type can also be filtered by the ICMP message code.
IGMP Type — Filters packets by IGMP message or message types.
DSCP — Matches the packets DSCP value.
IP Prec. — Matches the packet IP Precedence value to the ACE. Either the DSCP value or the IP
Precedence value is used to match packets to ACLs. The possible field range is 0-7.
Action — Indicates the action assigned to the packet matching the ACL. Packets are forwarded or dropped.
In addition, the port can be shut down, a trap can be sent to the network administrator, or packet is assigned
rate limiting restrictions for forwarding. The options are as follows:
Permit — Forwards packets which meet the ACL criteria.
Deny — Drops packets which meet the ACL criteria.
ShutdownDrops packet that meets the ACL criteria, and disables the port to which the packet was
addressed. Ports are reactivated from the Port Management Page.
Delete — To remove an ACE, click the ACE’s checkbox and click the Delete button.
Zobrazit stránku 83
1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 253 254

Komentáře k této Příručce

Žádné komentáře