
82 AR400 Series Router User Guide
Software Release 2.5.2
C613-02034-00 REV A
5. To check the configuration, enter the commands:
SHOW SYN=0
SHOW PPP=0
The output of the SHOW SYN command should show “Active” set to “yes”
and “Module” set to “ppp”. The output of the SHOW PPP command should
show interface ppp0 over syn0 with “LCP” as the control protocol. The Tx
and Rx LEDs are lit as data is sent and received on the interface.
Komentáře k této Příručce