Allied-telesis x310 Series Uživatelský manuál stáhnout pdf (Strana 71)

x310 Series Installation Guide for Stand-alone Switches

 Allied Telesis recommends cleaning out the holes with a brush or

compressed air.

8. Insert the two anchors into the holes.

9. Have another person hold the switch at the selected wall location while

you secure it to the wall with the two provided screws. Refer to

Figure 28. Be sure to observe the following guidelines as you install

the switch on the wall:

 If you are installing the switch on a wall with wooden studs, you

must secure the switch to the middle of the stud you identified in

step 4.

 Be sure to leave sufficient space from other devices or walls so that

you can access the front and back panels. Refer to

“Recommended Minimum Wall Area Dimensions” on page 66.

Figure 28. Installing the AT-x310-26FT Switch on a Wall

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 115 116

Žádné komentáře

Allied-telesis x310 Series Uživatelský manuál Strana 71