Allied-telesis AT-S62 Uživatelský manuál Strana 440

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 760
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 439
Chapter 22: SNMPv3 Configuration
Section III: SNMPv3 Operations 440
Modifying an
SNMPv3
Community
Table Entry
For each entry in the SNMPv3 Community Table, you can modify the
following parameters:
Community Name
Security Name
Transport Tag
Storage Type
However, you cannot modify the Community Index parameter.
Although you can display the SNMPv1 and SNMPv2c configuration
created with the procedures described in Chapter 5: SNMPv1 and
SNMPv2c Configuration on page 80, you cannot modify these
Community Table entries with the SNMPv3 Tables.
See the following procedures:
Modifying the Community Name on page 440
Modifying the Security Name on page 442
Modifying the Transport Tag on page 442
Modifying the Storage Type on page 443
Modifying the Community Name
To modify the Community Name parameter in an SNMPv3 Community
Table entry, perform the following procedure:
1. Follow steps 1 through 3 in the procedure described in Creating an
SNMPv3 User Table Entry on page 360. Or, from the Main Menu type
5->5->5.
The Configure SNMPv3 Table Menu is shown in Figure 127 on
page 361.
2. From the Configure SNMPv3 Table Menu, type 9 to select Configure
SNMPv3 Community Table.
The Configure SNMPv3 Community Table Menu is shown in
Figure 142 on page 437.
3. From the Configure SNMPv3 Community Table, type 3 to select
Modify SNMPv3 Table Entry.
Zobrazit stránku 439
1 2 ... 435 436 437 438 439 440 441 442 443 444 445 ... 759 760

Komentáře k této Příručce

Žádné komentáře