Allied-telesis AT-S60 Uživatelský manuál Strana 315

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 858
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 314
AT-S60 Management Software User’s Guide
Section III: SNMPv3 Protocol 315
Configuring the SNMPv3 View Table
This section contains a description of the SNMPv3 View Table and how
to create, delete, and modify table entries. Creating this table, allows you
to specify a view using the following parameters:
Subtree OID
Subtree Mask
MIB OID Table View
To configure the SNMPv3 View Table, you need to be very familiar with
the MIB tree. You can be very specific about the view a user can or
cannot access—down to a column or row of the tree. AT-S60 supports
the Internet subtree of the MIB tree. See RFC 2575 for detailed
information about defining a view.
There are three functions you can perform with the SNMPv3 User Table.
Creating an SNMPv3 View Table Entry on page 315
Deleting an SNMPv3 View Table Entry on page 318
Modifying an SNMPv3 View Table Entry on page 319
Creating an
SNMPv3 View
Table Entry
To create an entry in the SNMPv3 View Table, perform the following
procedure.
1. Follow steps 1 through 5 in the procedure described in Creating an
SNMPv3 User Table Entry on page 305. Or, from the Main Menu type
5->1->1->8->5.
The Configure SNMPv3 Table Menu is displayed.
2. From the Configure SNMPv3 Table Menu, type 3 to select Configure
SNMPv3 View Table.
Zobrazit stránku 314
1 2 ... 310 311 312 313 314 315 316 317 318 319 320 ... 857 858

Komentáře k této Příručce

Žádné komentáře