Allied-telesis AT-S60 Uživatelský manuál stáhnout pdf (Strana 310)

100

101

Chapter 17: SNMPv3 Configuration

Section III: SNMPv3 Protocol 310

The following prompt is displayed:

Enter User (Security) Name:

4. Enter the User Name of the User Table entry you want to delete.

The following prompt is displayed:

Do you want to delete this table entry? (Y/N):

[Yes/No]->

5. Enter Y to delete the user or N to save the user.

6. After making changes, type R until you return to the Main Menu. Then

type S to select Save Configuration Changes.

Modifying an

SNMPv3 User

Table Entry

This section describes how to modify parameters in an SNMPv3 Notify

Table entry. See the following procedures:

❑ Modifying the Authentication Protocol and Password on page

310

❑ Modifying the Privacy Protocol and Password on page 312

❑ Modifying the Storage Type on page 314

Modifying the Authentication Protocol and Password

To modify the Authentication Protocol and Password in an SNMPv3 User

Table entry, perform the following procedure.

1. Follow steps 1 through 5 in the procedure described in Configuring

the SNMPv3 User Table on page 305. Or, from the Main Menu type

5->1->1->8->5.

The Configure SNMPv3 User Table Menu is shown in Figure 101

2. From the Configure SNMPv3 Table Menu, type 2 to select Configure

SNMPv3 User Table.

The SNMPv3 User Table is shown in Figure 102.

3. From the SNMPv3 User Table, type 3 to select Modify SNMPv3 Table

Entry.

1 2 ... 305 306 307 308 309 310 311 312 313 314 315 ... 857 858

Komentáře k této Příručce

Žádné komentáře

Allied-telesis AT-S60 Uživatelský manuál Strana 310

Komentáře k této Příručce

Související produkty a manuály pro Počítačový hardware Allied-telesis AT-S60