Allied-telesis AT-S25 Uživatelský manuál stáhnout pdf (Strana 55)

AT-S25 Version 1.4 User’s Guide

Configuring the RS232 Port on the Master Switch

The default settings for the RS232 port on the front panel of the Ethernet

switch are as follows:

❑ Baud rate: 9600

❑ Data bits: 8

❑ Stop bits: 1

❑ Parity: None

❑ Flow control: None

To change the settings for the RS232 port on the master switch, perform

the following procedure:

1. From the Main Menu, select the master switch.

Note

You must select the master switch to perform this procedure. Do not

select a slave switch.

2. From the Main Menu, select System Configuration.

The System Configuration menu in Figure 7 on page 39 is

displayed.

3. From the System Configuration menu, select Terminal Configuration.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 165 166

Žádné komentáře

Allied-telesis AT-S25 Uživatelský manuál Strana 55