Allied-telesis LanEdge Print Server Uživatelský manuál

LanEdgePrint ServerQuick Install GuideThis Quick Install Guide contains brief instructionsonly, and is intended for experienced users or NetworkAdmini

Page 83. On the Details tab (Windows 95/98) or Ports tab(Windows NT 4.0), click the Capture Printer Port button.4. In the Path field of the Capture

Page 9Notes:• While you can use this printer in Windowsapplications, it is recommended that you doNOT do so. Large print jobs may cause errors.• Win

Page 10Windows NT Server (TCP/IP)1. Run the SETUP program in the root directory of the CD-ROM. Select Utilities, and install BiAdmin.2. Run BiAdmin.

Page 11NetWare 3.x, 4.x Print Server ModeFor Remote Printer mode, please refer to the full user manualon the CD-ROM.1. Copy the file QUICKSET.EXE fro

Page 12Using NDPS (NetWare 5)The following procedure is designed to enable Public AccessPrinting under NDPS, using the TCP/IP network protocol.Public

Page 13Figure 5: Create Printer Agent4. Enter the desired name for the Printer Agent (PA) Name5. Normally, the NDPS Manager will be the NDPS Mangero

Page 14Figure 6 Configure Port Handler10. In the Host address IP field, enter the IP Addresspreviously assigned to the Print Server device.11. In th

Page 15Workstation ConfigurationBefore attempting to install and configure Public AccessPrinters on your workstation using the procedure below, ensure

Page 16UnixBasic Setup1. Check the sticker on the base of the Print Server for theHardware Address.2. Associate the hardware address of the Print Se

Page 17• Remote Printer Name is L1 to Ln, representing thelogical printer ports on the Print Server, as configured instep 4.Full details of this proc

Table of ContentsQuick Install Guide... 1Physical Installation...

Page 18If your system is not listed above, do notattempt to use the PSfilter method of printing.

Page 1Physical Installation1. Connect the LAN cable to the Print Server. If both10BaseT and 10Base2 connections are fitted, use onlyONE (1) connectio

Page 2Windows Peer-to-PeerPeer-to-Peer printing means that each PC prints directly to thePrint Server's printer. This printing method can be used

Page 3Note: Because Print Server is set as DHCP client as default., Itis not necessary to assign an IP address to Print Server if thereis DHCP server

Page 44. Click Browse, and select the Print Server from the list.5. Ensure that the port displayed in Select Device Port iscorrect.6. The other fie

Page 5Figure 2: Available Ports (Win 95)Note: If you click the Configure Port button, you will seethe Configure Print Server screen again.5. Follow t

Page 63. Click Add Port. On Windows 95/98, you will see thefollowing Add Port screen:Figure 3 Add Port (Win95 PtP)4. Select Other as the type of por

Page 7Figure 4 Select Port (Windows 95/98)8. Configuration is now complete.You can now print using the printers attached to the PrintServer.Printing