Allied-telesis AT-FS970M Series Uživatelský manuál Strana 139

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 330
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 138
AT-FS970M Series Version 2.3.1.0 Web Interface User’s Guide
139
Assigning a Native VLAN
A VLAN can be assigned to a tagged port so that untagged ingress traffic
is placed on the VLAN. This VLAN is referred to as the native VLAN.
To assign a native VLAN to a tagged port, perform the following
procedure:
1. Hover the cursor over the Switching tab.
The Switching tab is displayed. See Figure 24 on page 65.
2. From the Switching tab drop-down menu, select VLANs.
The VLANs page is displayed. See Figure 51 on page 134.
3. From the VLANs page, click Add
.
The Add VLAN page is displayed. See Figure 52 on page 135.
4. From Add VLANs page, click Native VLAN
.
The Native VLAN page is displayed. See Figure 54.
Figure 54. Native VLAN Page
Zobrazit stránku 138
1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 329 330

Komentáře k této Příručce

Žádné komentáře