Allied-telesis AT-2973T (NetExtreme II) Uživatelský manuál stáhnout pdf (Strana 26)

Chapter 2: Installing the Hardware

Pre-Installation Checklist

Before you install an adapter card, check the following list:

1. Verify that your system is using the latest BIOS.

Note

If you acquired the adapter software from the Allied Telesis support

website, enter the path to where the adapter driver files reside on

your system.

2. If your system is active, shut it down.

3. When the system shut down is complete, power OFF and unplug your

system.

4. Holding the adapter card by the edges, remove it from its shipping

package and place it on an antistatic surface.

5. Check the adapter for visible signs of damage, particularly on the

card’s edge connector.

Caution

Do not attempt to install a damaged adapter. If the adapter is

damaged, report it to Allied Telesis. See “Contacting Allied Telesis”

on page 12.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 135 136

Žádné komentáře

Allied-telesis AT-2973T (NetExtreme II) Uživatelský manuál Strana 26