Allied-telesis AT-S24 Uživatelský manuál stáhnout pdf (Strana 110)

Configuring Virtual LANs and Quality of Service

110

Creating a Port-based or Tagged VLAN

Only one VLAN is defined by default on an AT-8200XL Series Switch. This

VLAN is named Default VLAN. The Default VLAN is assigned a VLAN ID

and PVID of 1. All the ports on the switch are initially port-based

(untagged) members of the Default VLAN.

The procedure for creating a new VLAN consists of three phases:

❑ Phase 1:

— Name the VLAN.

— Assign a VLAN ID (VID) number to the VLAN.

— Designate which ports are to be members of the VLAN.

— Define which, if any, ports will be tagged ports.

❑ Phase 2:

— Remove the untagged ports from the existing VLAN.

❑ Phase 3:

— Change the PVID of the untagged ports in the new VLANs to

match the VID.

Phase 1

To perform Phase 1, do the following:

1. From the Omega Main Menu, select Virtual LANs/QoS. The Virtual

LAN/QoS menu in Figure 53 is displayed.

Figure 53 Virtual LAN/QoS Menu

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 163 164

Žádné komentáře

Allied-telesis AT-S24 Uživatelský manuál Strana 110