Allied-telesis AT-MCM02 Uživatelský manuál stáhnout pdf (Strana 34)

SET LOADER Command

This command downloads a new version of the software onto the media

converter. It is required that your network has a TFTP server and that you

have downloaded the new software to the server.

Format:

SET LOADER FILE=filename SERVER=IPaddress

Variables:

filename: Specifies the path and filename of the file containing the media

converter software. The default filename is atmcm02.bin.

IPaddress: Specifies the IP address of the network server or workstation

containing the new software.

Example:

In the following example, the filename of the software is atmcm02.bin and

the IP address of the network device containing the software is

192.11.11.12:

SET LOADER FILE=atmcm02.bin SERVER=192.11.11.12

Note

You must perform the RESTART REBOOT command immediately after

you download a new version of the software. The command is described

on page 25.

SHOW LOADER Command

This command displays information used in downloading a new version of the

operating software onto a media converter. The information includes:

❑ The method by which the new software will be downloaded onto the

media converter.

❑ The filename of the software.

❑ The destination of the software, which is always flash ROM.

❑ The IP address of the network device containing the new software.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 51 52

Žádné komentáře

Allied-telesis AT-MCM02 Uživatelský manuál Strana 34