Allied Telesis Switch AT-S110 Uživatelský manuál stáhnout pdf (Strana 263)

AT-GS950/10PS Switch Web Interface User’s Guide

263

4. From the Voice VLAN field at the top of the page, select one of the

following choices from the pull-down menu:

Enable - The voice VLAN feature is active. The other parameter

fields in the voice VLAN Global Settings section become active and

are eligible for data to be entered.

Disable - The voice VLAN feature is inactive. The other parameter

fields in the voice VLAN Global Settings section become inactive

and are greyed out so that data cannot be entered.

5. In the voice VLAN Global Settings section, enter the configuration

information for the following parameters:

VLAN ID - This parameter is the tagged VLAN ID that has been

configured in “Tagged VLAN Configuration” on page 157 that you

intend for the voice VLAN. It is a pull-down menu showing the

tagged VLAN IDs that have been defined.

Aging Time - This parameter indicates the amount of time, in

hours, after the last IP phone's OUI was received on a port, after

which this port will be removed from the voice VLAN. The range is

1 to 120 hours.

COS - This parameter is CoS priority level assigned to the voice

data packets received on each voice VLAN port.

Note

For the COS priority to be effective, QoS must be Enabled. See

“Mapping CoS Priorities to Egress Queues” on page 180 for

information about enabling the QoS feature.

6. Click Apply. The values in the Voice VLAN Global Settings section

take effect.

7. In the table at the bottom of the page, The voice VLAN Auto-

Detection status is defined. From the Auto-Detection column, select

one of the port rows and then one of the following choices from the

pull-down menu:

Ignore - This parameter indicates that the setting in the All row

does not apply to the Dynamic Vlan Status field. In other

words, each port is set individually.

Enable - The voice VLAN Auto-Detection feature is activated

for the port row selected.

Disable - The voice VLAN Auto-Detection feature is active for

the port row selected.

1 2 ... 258 259 260 261 262 263 264 265 266 267 268 ... 385 386

Žádné komentáře

Allied Telesis Switch AT-S110 Uživatelský manuál Strana 263