Allied-telesis AT-TQ Series Uživatelský manuál stáhnout pdf (Strana 57)

AT-TQ Wireless Access Point Series User’s Guide

Broadcast/Multicast Rate

Limiting

Enables or disables rate limiting of

broadcast and multicast packets. Here are

the guidelines

- To activate rate limiting, click the dialog

box to add a check mark. To deactivate

rate limiting, click the box to remove the

check mark. The default setting is

disabled.

- The Rate Limit parameter defines the

maximum number of broadcast and

multicast packets per second of the

access point. The parameter has a range

of 1 to 50 packets per second. The default

is 50 packets per second.

- The Rate Limit Burst parameter allows

intermittent bursts of traffic on the access

point above the rate limit. The default is

75 packets per second.

- The Rate Limit Burst parameter must be

greater than the Rate Limit parameter.

Table 3. Modify Radio Settings Window (Continued)

Parameter Description

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 171 172

Žádné komentáře

Allied-telesis AT-TQ Series Uživatelský manuál Strana 57