Allied-telesis AT-S97 Uživatelský manuál Strana 118

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 254
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 117
Chapter 7: Network Time Protocol Commands
118
NTP SET
Syntax
ntp set server=
ipaddress
utcoffset=
integer
Parameters
server Specifies the IP address of an NTP server.
utcoffset Specifies the time difference, in hours, between Universal
Time Coordinated (UTC) and local time. The range is
between -12 and +12 hours. The default is 0 hours.
Privilege Levels
Administrator and read-write.
Description
This command specifies the IP address of the NTP server on your network
or the Internet. In addition, this command permits you to adjust the local
time of the media converter according to your local time zone.
Examples
This command specifies the IP address 149.122.55.77 as the NTP server:
ntp set server=149.122.55.77
This command specifies the IP address 149.122.55.79 as the NTP server
with a UTC offset of 3 hours:
ntp set server=149.122.55.79 utcoffset=3
This command specifies the IP address 149.122.55.81 as the NTP server
with a UTC offset of -6 hours:
ntp set server=149.122.55.81 utcoffset=-6
Zobrazit stránku 117
1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 253 254

Komentáře k této Příručce

Žádné komentáře