Allied-telesis AT-S41 Uživatelský manuál stáhnout pdf (Strana 191)

AT-S41 User’s Guide

191

Configuring Port Monitoring

To enable or disable port monitoring, perform the following procedure:

1. Click on the Advanced Config menu tab and select Port Monitoring

from the sub-menu.

The Port Monitoring Configuration page will appear, as displayed

in Figure 64.

Figure 64 Port Monitoring Configuration Page

2. To configure port monitoring, do the following:

a. Use the Monitoring Port pull-down menus to select the port to

function as the port monitor and the stack ID for that port.

b. Use the Port Being Monitored pull-down menus to select the port

whose traffic is to be monitored and the stack ID for that port.

c. Click the Apply button on the right-hand side of the page.

d. Select Enable from the Monitoring Status pull-down menu and

click the Apply button next to the Monitoring Status pull-down

menu.

Port monitoring is immediately activated on the switch. You can

now connect a data analyzer to the monitoring port to monitor

the traffic on the selected port.

3. To disable port monitoring, select Disable from the Monitoring Status

pull-down menu and click the Apply button.

The port monitor is disabled. The port that was functioning as the

monitor port can now be used for normal network operations.

1 2 ... 186 187 188 189 190 191 192 193 194 195 196 ... 235 236

Žádné komentáře

Allied-telesis AT-S41 Uživatelský manuál Strana 191