Allied-telesis AT-S39 Uživatelský manuál Strana 170
- Strana / 197
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Chapter 20: Download and Upload Commands
170
UPLOAD
Syntax
upload method=tftp|xmodem type=image|config
method Specifies the method of the upload. Only one option
is available:
tftp Indicates that the upload will be
performed using TFTP. To use this
option, you must have TFTP server
software on a network node.
xmodem Indicates that the upload will be
from the switch to the
management workstation.
type Specifies the file to be uploaded. Options are:
image Uploads both the AT-S39 software
image and bootloader.
config Uploads the switch’s
configuration file.
You can specify only one file at a time.
Description
This command is used to upload the AT-S39 software image and
bootloader from a switch to a management workstation. This command
can also be used to upload a switch’s configuration file to a
management workstation.
Before uploading files, note the following:
❑ This command can only be performed from a local management
session. This command is not available from a Telnet or web
browser management session.
❑ A configuration file cannot be edited with a text editor or word
processor.
- Command Line 1
- User’s Guide 1
- 2003 Allied Telesyn, Inc 2
- Table of Contents 3
- Document Conventions 8
- AT-S39 User’s Guide 9
- Contacting Allied Telesyn 10
- Management Software Updates 11
- Starting a Command Line 12
- Management Session 12
- Starting a Management Session 13
- Key Features 14
- Command Formatting 15
- Basic Command Line Commands 16
- SAVE CONFIGURATION 17
- SET PROMPT 18
- CLEAR SCREEN 19
- SET SWITCH CONSOLEMODE 21
- LOGOFF and QUIT 22
- SHOW DHCPBOOTP 24
- ENABLE DHCPBOOTP 25
- DISABLE DHCPBOOTP 26
- SHOW IP ROUTE 30
- SET IP ROUTE 31
- RESET IP 32
- PURGE IP 33
- SHOW SYSTEM 34
- SET SYSTEM 35
- RESET SYSTEM 36
- SHOW SWITCH 37
- RESTART SWITCH 38
- RESTART REBOOT 39
- Enhanced Stacking Commands 42
- SET SWITCH STACKMODE 43
- SHOW REMOTELIST 44
- ACCESS SWITCH 45
- SNMP Community Strings and 48
- Trap Commands 48
- SHOW SNMP 49
- DESTROY SNMP COMMUNITY 50
- CREATE SNMP COMMUNITY 51
- SET SNMP COMMUNITY 52
- RESET SNMP 53
- ADD SNMP COMMUNITY TRAPHOST 54
- Management Security 56
- SET PASSWORD MANAGER 57
- SET PASSWORD OPERATOR 58
- SHOW HTTP SERVER 59
- DISABLE HTTP SERVER 61
- ENABLE SNMP 62
- DISABLE SNMP 63
- SET SWITCH CONSOLETIMER 64
- SHOW SWITCH PORT 66
- SET SWITCH PORT 67
- RESET SWITCH PORT 71
- SET SWITCH SECURITYMODE 73
- SET SWITCH THRESHOLD 75
- SHOW SWITCH THRESHOLD 76
- SHOW SWITCH TRUNK 78
- CREATE SWITCH TRUNK 79
- ADD SWITCH TRUNK 80
- DELETE SWITCH TRUNK 81
- DESTROY SWITCH TRUNK 82
- CREATE SWITCH MIRROR 84
- ADD SWITCH MIRROR 85
- DELETE SWITCH MIRROR 86
- SET SWITCH MIRROR 87
- DESTROY SWITCH MIRROR 88
- STP Commands 89
- ACTIVATE STP 91
- ENABLE STP 92
- DISABLE STP 93
- SET STP PORT 96
- RESET STP 98
- RSTP Commands 99
- SHOW RSTP 100
- ACTIVATE RSTP 101
- DISABLE RSTP 102
- ENABLE RSTP 103
- RESET RSTP 104
- SET RSTP 105
- SET RSTP PORT 108
- VLAN Commands 111
- SET SWITCH SWITCHMODE 112
- SET SWITCH VLANMODE 113
- SHOW VLAN 114
- CREATE VLAN 115
- Chapter 13: VLAN Commands 116
- DELETE VLAN 122
- RESET VLAN 126
- SET SWITCH VLANSTATUS 127
- SET SWITCH INFILTERING 128
- MAC Address Table Commands 129
- SHOW SWITCH FDB 130
- ADD SWITCH FDB 132
- DELETE SWITCH FDB 133
- SET SWITCH AGINGTIMER 134
- IGMP Snooping Commands 135
- SET IP IGMP 136
- SHOW IP IGMP 138
- Broadcast Frame Control 139
- SET SWITCH BROADCAST 140
- TACACS+ and RADIUS 142
- Commands 142
- DISABLE AUTHENTICATION 143
- ENABLE AUTHENTICATION 144
- RESET AUTHENTICATION 145
- SET AUTHENTICATION 146
- SHOW AUTHENTICATION 148
- ADD TACACSSERVER 149
- DELETE TACACSSERVER 150
- ADD RADIUSSERVER 151
- DELETE RADIUSSERVER 152
- ENABLE PORTACCESS 154
- DISABLE PORTACCESS 155
- SHOW PORTACCESS STATUS 156
- SET PORTACCESS 157
- Statistics Commands 160
- SHOW SWITCH COUNTER 161
- SHOW SWITCH PORT COUNTER 162
- RESET SWITCH COUNTER 163
- RESET SWITCH PORT COUNTER 164
- Download and Upload 165
- ENABLE TFTPSERVER 172
- DISABLE TFTPSERVER 173
- SHOW TFTPSERVER 174
- Command Reference 175
- Basic Switch Commands 177
- Chapter 21: Command Reference 178
- Port Parameter Commands 182
- Port Security Commands 183
- Port Trunking Commands 183
- Port Mirroring Commands 184
- TACACS+ and RADIUS Commands 190
- Download and Upload Commands 192
Související produkty a manuály pro Počítačový hardware Allied-telesis AT-S39
(164 stránky)© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.129 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce