Allied-telesis AT-GS900/24 Uživatelský manuál stáhnout pdf (Strana 32)

Chapter 2: Installation

Installing the Switch in a Rack

Perform the following procedure to install the switch in a standard 19-inch

rack. If you are not installing the switch in a rack, go to the next procedure.

1. Place the unit upside down on a level, secure surface.

2. Using a flat-head screwdriver, remove the self-adhesive rubber feet

from the bottom of the switch, as shown in Figure 9.

Figure 9. Removing the Feet

3. Turn the switch over.

4. Attach the two rackmounting brackets (provided) to the sides of the

switch using the eight flathead Phillips screws (provided), as illustrated

in Figure 10.

Figure 10. Attaching Rackmounting Brackets

605

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Žádné komentáře

Allied-telesis AT-GS900/24 Uživatelský manuál Strana 32