Allied-telesis AT-9000 Series Uživatelský manuál Strana 103
- Strana / 148
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
AT-9000 Switch Command Line User’s Guide
75
Displaying the System Environmental Status
The switch monitors the environmental status of the switch and any
attached PSU, XEM, or expansion option. The environmental status
covers information about temperatures, fans, and voltage. To display this
information, go to User Exec or Privileged Exec mode and enter the
command:
awplus# show system environment
Figure 28 shows an example of the information the command displays.
The columns are described in “SHOW SYSTEM ENVIRONMENT” on
page 81.
Figure 28. SHOW SYSTEM ENVIRONMENT Command
Note
Switches that do not contain fan controllers will not display
temperature readings.
Environment Monitoring Status
--------------------------------------------------------
Switch Model: AT-9000/28POE
--------------------------------------------------------
ID Sensor (Units) Reading Status
--------------------------------------------------------
0 Temp (Degrees C) 37 Normal
1 Fan 1 (RPM) 3467 Normal
2 PSU 1 On Normal
3 PSU 2 Off Off
--------------------------------------------------------
- AT-9000 Series 1
- Copyright 2
- Contents 10
- Document Conventions 38
- Contacting Allied Telesis 40
- Getting Started 41
- AlliedWare Plus Command Line 43
- Interface 43
- Management Sessions 44
- Remote Telnet Management 45
- Web Browser Windows 45
- Management Interfaces 47
- Local Manager Account 48
- AlliedWare Plus Command Modes 49
- Moving Down the Hierarchy 52
- INTERFACE 54
- Command 54
- Static Port Trunk 54
- VLAN Command 54
- Moving Up the Hierarchy 56
- DISABLE command 57
- Port Numbers in Commands 58
- Combo Ports 25 to 28 60
- Command Format 61
- Startup Messages 62
- Starting a Management Session 65
- What to Configure First 70
- Changing the 71
- Login Password 71
- Assigning a Name 71
- Adding a 72
- Management IP 72
- Saving Your 74
- Ending a Management Session 75
- Basic Command Line Management 77
- Clearing the Screen 78
- Displaying the On-line Help 79
- ? (Question Mark Key) 85
- CLEAR SCREEN 87
- CONFIGURE TERMINAL 88
- Chapter 5 101
- Overview 102
- Controlling Eco-Mode LED 104
- Temperature and Fan Control 105
- Commands 105
- ECOFRIENDLY LED 106
- NO ECOFRIENDLY LED 107
- SHOW ECOFRIENDLY 108
- SHOW SYSTEM ENVIRONMENT 109
- Parameter Description 110
- Basic Operations 111
- Basic Switch Management 113
- Adding a Name to the Switch 114
- Contact: JordanB 115
- Displaying Parameter Settings 116
- Pinging Network Devices 118
- Resetting the Switch 119
- filename2 121
- “SHOW BAUD-RATE” on page 128 123
- Configuring the Banners 127
- Chapter 8 131
- BANNER EXEC 133
- BANNER LOGIN 135
- BANNER MOTD 137
- BAUD-RATE SET 139
- CLOCK SET 140
- ERASE STARTUP-CONFIG 141
- EXEC-TIMEOUT 142
- HOSTNAME 145
- LINE CONSOLE 146
- LINE VTY 147
- NO HOSTNAME 148
- PING IPv6 151
- SERVICE MAXMANAGER 154
- SHOW BANNER LOGIN 155
- SHOW BAUD-RATE 156
- SHOW CLOCK 157
- SHOW RUNNING-CONFIG 158
- SHOW SWITCH 159
- SHOW SYSTEM 161
- SHOW USERS 163
- SHOW VERSION 165
- SNMP-SERVER CONTACT 166
- SNMP-SERVER LOCATION 167
- SYSTEM TERRITORY 168
- Port Parameters 171
- Adding Descriptions 172
- Chapter 9: Port Parameters 174
- Enabling or Disabling Ports 176
- Resetting Ports 181
- Displaying Port 188
- Displaying SFP Information 190
- Port Parameter Commands 191
- Command Mode Description 193
- BACKPRESSURE 194
- CLEAR PORT COUNTER 197
- DESCRIPTION 198
- EGRESS-RATE-LIMIT 202
- FCTRLLIMIT 203
- FLOWCONTROL 204
- HOLBPLIMIT 207
- NO EGRESS-RATE-LIMIT 209
- NO FLOWCONTROL 210
- NO SHUTDOWN 211
- NO SNMP TRAP LINK-STATUS 212
- NO STORM-CONTROL 213
- POLARITY 214
- RENEGOTIATE 217
- SHOW FLOWCONTROL INTERFACE 219
- SHOW INTERFACE 221
- Interface Port number 222
- SHOW INTERFACE BRIEF 225
- SHOW INTERFACE STATUS 227
- Parameter 229
- SHOW RUNNING-CONFIG INTERFACE 232
- SHOW STORM-CONTROL 233
- SHOW SYSTEM PLUGGABLE 235
- SHOW SYSTEM PLUGGABLE DETAIL 236
- SHUTDOWN 237
- SNMP TRAP LINK-STATUS 238
- STORM-CONTROL 241
- Power Over Ethernet 243
- Prioritization 245
- Enabling and Disabling PoE 246
- Prioritizing Ports 249
- Managing Legacy PDs 251
- Monitoring Power Consumption 252
- Displaying PoE Information 253
- Power Over Ethernet Commands 255
- NO POWER-INLINE ALLOW-LEGACY 258
- NO POWER-INLINE DESCRIPTION 259
- NO POWER-INLINE ENABLE 260
- NO POWER-INLINE MAX 261
- NO POWER-INLINE PRIORITY 262
- NO SERVICE POWER-INLINE 264
- POWER-INLINE ALLOW-LEGACY 266
- POWER-INLINE DESCRIPTION 267
- POWER-INLINE ENABLE 268
- POWER-INLINE MAX 269
- POWER-INLINE PRIORITY 270
- POWER-INLINE USAGE-THRESHOLD 272
- SERVICE POWER-INLINE 273
- SHOW POWER-INLINE 274
- SHOW POWER-INLINE INTERFACE 279
- Chapter 13 285
- Adding an IPv4 289
- Management 289
- Default Gateway 291
- Deleting an IPv4 292
- Address and 292
- Displaying an 293
- Adding an IPv6 294
- Deleting an IPv6 296
- CLEAR IPV6 NEIGHBORS 301
- IP ADDRESS 302
- IP ADDRESS DHCP 304
- IP ROUTE 306
- 143.87.132.45: 307
- IPV6 ADDRESS 308
- IPV6 ROUTE 310
- 45ab:672:934c::78:17cb: 311
- NO IP ADDRESS 312
- NO IP ADDRESS DHCP 313
- NO IP ROUTE 314
- NO IPV6 ADDRESS 315
- NO IPV6 ROUTE 316
- SHOW IP INTERFACE 317
- SHOW IP ROUTE 318
- SHOW IPV6 INTERFACE 320
- SHOW IPV6 ROUTE 321
- Chapter 15 323
- SNTP Server 325
- Disabling the SNTP Client 328
- Displaying the SNTP Client 329
- Displaying the Date and Time 330
- SNTP Client Commands 331
- CLOCK SUMMER-TIME 332
- CLOCK TIMEZONE 333
- NO CLOCK SUMMER-TIME 334
- NO NTP PEER 335
- NTP PEER 336
- PURGE NTP 337
- SHOW NTP ASSOCIATIONS 339
- SHOW NTP STATUS 341
- Adding Static MAC Addresses 346
- Deleting MAC Addresses 348
- Setting the Aging Timer 350
- Chapter 17: MAC Address Table 352
- MAC Address Table Commands 353
- CLEAR MAC ADDRESS-TABLE 354
- MAC ADDRESS-TABLE AGEING-TIME 356
- MAC ADDRESS-TABLE STATIC 358
- NO MAC ADDRESS-TABLE STATIC 360
- SHOW MAC ADDRESS-TABLE 362
- Chapter 19: Enhanced Stacking 368
- Save the configuration 371
- Configuring a Member Switch 372
- Member Switches 378
- Disabling Enhanced Stacking 387
- Enhanced Stacking Commands 389
- ESTACK COMMAND-SWITCH 391
- ESTACK RUN 392
- NO ESTACK COMMAND-SWITCH 393
- NO ESTACK RUN 394
- RCOMMAND 395
- REBOOT ESTACK MEMBER 396
- SHOW ESTACK 398
- SHOW ESTACK COMMAND-SWITCH 400
- SHOW ESTACK REMOTELIST 401
- UPLOAD CONFIG REMOTELIST 403
- UPLOAD IMAGE REMOTELIST 404
- Port Mirror 407
- Chapter 21: Port Mirror 410
- Displaying the Port Mirror 413
- Port Mirror Commands 415
- MIRROR INTERFACE 417
- NO MIRROR INTERFACE 419
- SHOW MIRROR 420
- (IGMP) Snooping 423
- Host Node Topology 426
- Enabling IGMP Snooping 427
- Disabling IGMP Snooping 430
- Displaying IGMP Snooping 431
- IGMP Snooping Commands 433
- CLEAR IP IGMP 434
- IP IGMP LIMIT 435
- IP IGMP QUERIER-TIMEOUT 436
- IP IGMP SNOOPING 437
- IP IGMP SNOOPING MROUTER 440
- IP IGMP STATUS 441
- NO IP IGMP SNOOPING 442
- NO IP IGMP SNOOPING MROUTER 443
- SHOW IP IGMP SNOOPING 444
- Multicast Commands 447
- File System 453
- destinationfile 457
- Chapter 26: File System 460
- File System Commands 463
- DELETE FORCE 466
- SHOW FILE SYSTEMS 469
- Boot Configuration Files 471
- Chapter 29 477
- BOOT CONFIG-FILE 478
- COPY RUNNING-CONFIG 480
- NO BOOT CONFIG-FILE 483
- SHOW BOOT 484
- SHOW STARTUP-CONFIG 486
- File Transfer 489
- Downloading 491
- Software with 491
- Files to the 492
- Switch with 492
- Uploading Files 493
- 20100601091645.txt 494
- Waiting to send 497
- Chapter 30: File Transfer 498
- File Transfer Commands 501
- COPY FILENAME ZMODEM 502
- COPY FLASH TFTP 503
- COPY TFTP FLASH 504
- COPY ZMODEM 506
- Event Messages 509
- Event Log 511
- Displaying the Event Log 513
- Clearing the Event Log 514
- Event Log Commands 515
- CLEAR LOG BUFFERED 516
- LOG BUFFERED 517
- NO LOG BUFFERED 519
- OUtputID Type Status Details 520
- SHOW LOG 521
- SHOW LOG CONFIG 524
- SHOW LOG REVERSE 525
- SHOW LOG TAIL 526
- Syslog Client 527
- program 529
- Chapter 34: Syslog Client 530
- Syslog Client Commands 535
- LOG HOST 536
- NO LOG HOST 538
- Port Trunks 541
- Static Port Trunks 543
- Displaying Static Port Trunks 551
- Static Port Trunk Commands 553
- NO STATIC-CHANNEL-GROUP 554
- PORT-CHANNEL LOAD-BALANCE 555
- SHOW STATIC-CHANNEL-GROUP 557
- STATIC-CHANNEL-GROUP 558
- Chapter 38 561
- Load Distribution 563
- Creating New Aggregators 565
- Adding Ports to Aggregators 567
- Deleting Aggregators 569
- Displaying Aggregators 570
- LACP Commands 573
- CHANNEL-GROUP 574
- LACP SYSTEM-PRIORITY 576
- NO CHANNEL-GROUP 577
- SHOW ETHERCHANNEL 580
- SHOW ETHERCHANNEL DETAIL 581
- Chapter 39: LACP Commands 582
- SHOW ETHERCHANNEL SUMMARY 583
- SHOW LACP SYS-ID 584
- SHOW PORT ETHERCHANNEL 585
- Spanning Tree Protocols 587
- STP, RSTP and MSTP Protocols 589
- Path Costs and Port Costs 592
- Port Priority 593
- Point-to-Point and Edge Ports 596
- Edge Port 597
- Point-to-Point and Edge Port 597
- Workstation 597
- (Full-duplex Mode) 597
- Mixed STP and RSTP Networks 598
- Spanning Tree and VLANs 599
- RSTP and MSTP BPDU Guard 600
- STP, RSTP, MSTP Loop Guard 602
- STP and RSTP Root Guard 607
- Spanning Tree Protocol (STP) 609
- Procedures 609
- Setting the Switch Parameters 612
- Setting the Port Parameters 614
- Displaying STP Settings 616
- STP Commands 617
- Chapter 42: STP Commands 618
- NO SPANNING-TREE STP ENABLE 619
- SHOW SPANNING-TREE 620
- SPANNING-TREE FORWARD-TIME 622
- SPANNING-TREE GUARD ROOT 623
- SPANNING-TREE HELLO-TIME 624
- SPANNING-TREE MAX-AGE 625
- SPANNING-TREE MODE STP 626
- SPANNING-TREE PATH-COST 627
- SPANNING-TREE PORTFAST 628
- SPANNING-TREE STP ENABLE 632
- Setting the 636
- Forward Time 636
- Hello Time, and 636
- Setting the Bridge 637
- Priority 637
- Enabling or 637
- Disabling BPDU 637
- Configuring Port 639
- Displaying RSTP Settings 644
- RSTP Commands 645
- Chapter 44: RSTP Commands 646
- NO SPANNING-TREE PORTFAST 647
- NO SPANNING-TREE LOOP-GUARD 649
- NO SPANNING-TREE RSTP ENABLE 651
- SPANNING-TREE LINK-TYPE 659
- SPANNING-TREE LOOP-GUARD 660
- SPANNING-TREE MODE RSTP 662
- SPANNING-TREE RSTP ENABLE 668
- Chapter 45 669
- MSTI Guidelines 673
- VLAN and MSTI Associations 674
- Ports in Multiple MSTIs 675
- Guidelines 678
- Summary of Guidelines 681
- Associating VLANs to MSTIs 683
- MSTP Root Guard 687
- MSTP Commands 689
- Chapter 46: MSTP Commands 690
- INSTANCE MSTI-ID PRIORITY 691
- INSTANCE MSTI-ID VLAN 693
- NO SPANNING-TREE MSTP ENABLE 696
- SHOW SPANNING-TREE MST CONFIG 698
- SHOW SPANNING-TREE MST 699
- SPANNING-TREE MODE MSTP 704
- SPANNING-TREE MSTP ENABLE 705
- SPANNING-TREE MST INSTANCE 707
- <region-name> 711
- REVISION 712
- Virtual LANs 713
- Port-based and Tagged VLANs 715
- Port-based VLANs 717
- Tagged VLANs 717
- Port-based VLAN Overview 718
- Port VLAN 719
- Identifier 719
- Port-based 721
- Example 1 721
- Example 2 722
- Tagged VLAN Overview 724
- Tagged VLAN 726
- Creating VLANs 729
- Adding Tagged Ports to VLANs 732
- Deleting VLANs 736
- Displaying the VLANs 737
- Port-based and Tagged VLAN 739
- NO SWITCHPORT ACCESS VLAN 740
- NO SWITCHPORT TRUNK 741
- SHOW VLAN 744
- SWITCHPORT ACCESS VLAN 746
- SWITCHPORT MODE ACCESS 748
- SWITCHPORT MODE TRUNK 749
- SWITCHPORT TRUNK ALLOWED VLAN 751
- SWITCHPORT TRUNK NATIVE VLAN 754
- Chapter 49 759
- Figure 137. GVRP Example 761
- GVRP and Network Security 764
- Enabling GVRP on the Switch 766
- Enabling GIP on the Switch 767
- Enabling GVRP on the Ports 768
- Setting the GVRP Timers 769
- Disabling GVRP on the Ports 771
- Disabling GIP on the Switch 772
- Disabling GVRP on the Switch 773
- Displaying GVRP 775
- CONVERT DYNAMIC VLAN 779
- GVRP APPLICANT STATE ACTIVE 780
- GVRP APPLICANT STATE NORMAL 781
- GVRP ENABLE 782
- GVRP REGISTRATION 783
- GVRP TIMER JOIN 784
- GVRP TIMER LEAVE 785
- GVRP TIMER LEAVEALL 786
- NO GVRP ENABLE 787
- NO GVRP TIMER JOIN 788
- NO GVRP TIMER LEAVE 789
- NO GVRP TIMER LEAVEALL 790
- PURGE GVRP 791
- SHOW GVRP APPLICANT 792
- SHOW GVRP CONFIGURATION 793
- SHOW GVRP MACHINE 794
- SHOW GVRP STATISTICS 795
- Receive GARP Messages: Empty 796
- Transmit GARP Messages: Empty 796
- SHOW GVRP TIMER 797
- MAC Address-based VLANs 799
- VLANs that Span 803
- Switches 803
- General Steps 806
- Removing MAC Addresses 809
- Displaying VLANs 811
- Chapter 52 815
- macaddress 817
- SHOW VLAN MACADDRESS 820
- VLAN MACADDRESS 822
- Sales and the VID 3: 823
- Private Port VLANs 829
- Private VLAN 831
- Functionality 831
- Creating Private VLANs 833
- Adding Host and Uplink Ports 834
- Displaying Private VLANs 836
- Private Port VLAN Commands 837
- PRIVATE-VLAN 839
- SHOW VLAN PRIVATE-VLAN 840
- Voice VLAN Commands 843
- NO SWITCHPORT VOICE VLAN 844
- SWITCHPORT VOICE DSCP 845
- SWITCHPORT VOICE VLAN 846
- VLAN Stacking 849
- Section III: File System 823 851
- Components 852
- VLAN Stacking Process 853
- Example of VLAN Stacking 854
- Section III: File System 827 855
- Chapter 56: VLAN Stacking 856
- 828 Section III: File System 856
- Section III: File System 829 857
- 830 Section III: File System 858
- VLAN Stacking Commands 859
- NO SWITCHPORT VLAN-STACKING 860
- PLATFORM VLAN-STACKING-TPID 861
- SHOW VLAN VLAN-STACKING 862
- SWITCHPORT VLAN-STACKING 863
- 836 Section III: File System 864
- Port Security 865
- Chapter 58 867
- Configuring Ports 870
- INTERFACE Command 875
- NO SWITCHPORT PORT-SECURITY 878
- SHOW PORT-SECURITY INTERFACE 880
- SWITCHPORT PORT-SECURITY 885
- Chapter 60 891
- Authentication Process 893
- Port Roles 894
- Single host mode 897
- Multi host mode 897
- Multi supplicant mode 897
- Multi Supplicant 899
- Supplicant VLAN 903
- Attributes on the 903
- RADIUS Server 903
- Guest VLAN 904
- RADIUS Accounting 905
- Operating Modes 911
- Configuring Reauthentication 913
- Control Commands 919
- AUTH DYNAMIC-VLAN-CREATION 923
- VLAN assignments: 924
- AUTH GUEST-VLAN 925
- AUTH HOST-MODE 926
- AUTH REAUTHENTICATION 928
- AUTH TIMEOUT QUIET-PERIOD 929
- AUTH TIMEOUT REAUTH-PERIOD 930
- AUTH TIMEOUT SERVER-TIMEOUT 931
- AUTH TIMEOUT SUPP-TIMEOUT 932
- AUTH-MAC ENABLE 933
- AUTH-MAC REAUTH-RELEARNING 934
- DOT1X CONTROL-DIRECTION 935
- DOT1X EAP 937
- DOT1X INITIALIZE INTERFACE 939
- DOT1X MAX-REAUTH-REQ 940
- DOT1X PORT-CONTROL AUTO 941
- DOT1X TIMEOUT TX-PERIOD 944
- NO AUTH DYNAMIC-VLAN-CREATION 946
- NO AUTH GUEST-VLAN 947
- NO AUTH REAUTHENTICATION 948
- NO AUTH-MAC ENABLE 949
- NO DOT1X PORT-CONTROL 950
- SHOW AUTH-MAC INTERFACE 951
- SHOW DOT1X 955
- SHOW DOT1X INTERFACE 956
- Section IX 959
- SNMPv1 and SNMPv2c 961
- Enabling SNMPv1 and SNMPv2c 964
- Creating Community Strings 965
- Deleting Community Strings 968
- Disabling SNMPv1 and SNMPv2c 969
- Displaying SNMPv1 and SNMPv2c 970
- Exec mode: 971
- SNMPv1 and SNMPv2c Commands 973
- NO SNMP-SERVER 975
- NO SNMP-SERVER COMMUNITY 976
- NO SNMP-SERVER ENABLE TRAP 977
- Global Configuration mode 978
- SHOW RUNNING-CONFIG SNMP 983
- SHOW SNMP-SERVER COMMUNITY 985
- SNMP-SERVER COMMUNITY 989
- SNMP-SERVER ENABLE TRAP 990
- SNMP-SERVER ENABLE TRAP AUTH 991
- SNMPv3 Commands 997
- NO SNMP-SERVER ENGINEID LOCAL 1000
- NO SNMP-SERVER GROUP 1001
- NO SNMP-SERVER HOST 1002
- NO SNMP-SERVER USER 1004
- NO SNMP-SERVER VIEW 1005
- SHOW SNMP-SERVER 1006
- SHOW SNMP-SERVER GROUP 1007
- SHOW SNMP-SERVER HOST 1008
- SHOW SNMP-SERVER USER 1009
- SHOW SNMP-SERVER VIEW 1010
- SNMP-SERVER 1011
- SNMP-SERVER ENGINEID LOCAL 1012
- SNMP-SERVER GROUP 1013
- Examples 1014
- SNMP-SERVER HOST 1015
- Chapter 64: SNMPv3 Commands 1016
- SNMP-SERVER USER 1017
- Confirmation Command 1018
- SNMP-SERVER VIEW 1019
- Network Management 1021
- Chapter 65 1023
- Configuring the sFlow Agent 1026
- Configuring the Ports 1027
- Configuring the 1028
- Polling Interval 1028
- Enabling the sFlow Agent 1029
- Disabling the sFlow Agent 1030
- Displaying the sFlow Agent 1031
- Configuration Example 1032
- Chapter 65: sFlow Agent 1034
- Chapter 66 1035
- NO SFLOW COLLECTOR IP 1036
- NO SFLOW ENABLE 1037
- SFLOW COLLECTOR IP 1038
- SFLOW ENABLE 1039
- SFLOW POLLING-INTERVAL 1040
- SFLOW SAMPLING-RATE 1042
- SHOW SFLOW 1044
- LLDP and LLDP-MED 1047
- Mandatory 1049
- LLDP TLVs 1049
- Optional LLDP 1049
- MED TLVs 1051
- Chapter 67: LLDP and LLDP-MED 1054
- port-description 1056
- link-aggregation 1056
- mac-phy-config 1056
- Capabilities 1058
- Network-policy 1058
- Use the SHOW LLDP 1059
- INTERFACE command to confirm 1059
- Removing LLDP TLVs from Ports 1069
- Displaying Port Settings 1074
- Displaying Port TLVs 1077
- LLDP and LLDP-MED Commands 1079
- CLEAR LLDP STATISTICS 1082
- CLEAR LLDP TABLE 1083
- LLDP HOLDTIME-MULTIPLIER 1084
- LLDP LOCATION 1085
- LLDP MANAGEMENT-ADDRESS 1087
- LLDP MED-NOTIFICATIONS 1089
- LLDP MED-TLV-SELECT 1090
- LLDP NOTIFICATIONS 1093
- LLDP NOTIFICATION-INTERVAL 1094
- LLDP REINIT 1095
- LLDP RUN 1096
- LLDP TIMER 1097
- LLDP TLV-SELECT 1098
- LLDP TRANSMIT RECEIVE 1101
- LLDP TX-DELAY 1102
- LOCATION CIVIC-LOCATION 1103
- LOCATION COORD-LOCATION 1106
- LOCATION ELIN-LOCATION 1109
- NO LLDP MED-NOTIFICATIONS 1110
- NO LLDP MED-TLV-SELECT 1111
- NO LLDP NOTIFICATIONS 1113
- NO LLDP RUN 1114
- NO LLDP TLV-SELECT 1115
- NO LLDP TRANSMIT RECEIVE 1116
- NO LOCATION 1117
- SHOW LLDP 1119
- SHOW LLDP INTERFACE 1121
- Parameters 1123
- Description 1123
- SHOW LLDP NEIGHBORS DETAIL 1125
- Voice VLAN ID 1128
- SHOW LLDP NEIGHBORS INTERFACE 1130
- SHOW LLDP STATISTICS 1132
- SHOW LOCATION 1136
- Chapter 69 1139
- Adding Static ARP Entries 1141
- Displaying the ARP Table 1143
- CLEAR ARP-CACHE 1148
- NO ARP (IP ADDRESS) 1149
- SHOW ARP 1150
- Chapter 71 1153
- RMON Port Statistics 1155
- Viewing Statistics 1156
- Deleting Statistics 1156
- RMON Histories 1157
- Displaying 1158
- History Groups 1158
- Deleting History 1159
- RMON Alarms 1160
- Creating RMON 1161
- Statistics Groups 1161
- Creating an 1163
- Alarm - Example 1163
- Enter_log_message 1164
- Chapter 71: RMON 1166
- Phase 3: Creating the Event 1167
- Phase 4: Creating the Alarm 1167
- Use the SHOW RMON ALARM 1168
- RMON Commands 1169
- Chapter 72: RMON Commands 1170
- NO RMON ALARM 1171
- NO RMON COLLECTION HISTORY 1172
- NO RMON COLLECTION STATS 1173
- NO RMON EVENT 1174
- RMON ALARM 1175
- RMON COLLECTION HISTORY 1178
- RMON COLLECTION STATS 1180
- RMON EVENT LOG 1181
- RMON EVENT LOG TRAP 1182
- RMON EVENT TRAP 1184
- SHOW RMON ALARM 1186
- SHOW RMON EVENT 1188
- SHOW RMON HISTORY 1190
- SHOW RMON STATISTICS 1192
- Chapter 73 1193
- Creating ACLs 1197
- Creating 1209
- Numbered MAC 1209
- Assigning ACLs to Ports 1212
- Assigning MAC 1213
- Address ACLs to 1213
- Removing ACLs from Ports 1215
- Restricting Remote Access 1217
- ACLs to VTY 1218
- Assigning Named 1219
- IPv4 and IPv6 1219
- Unrestricting Remote Access 1222
- Displaying the ACLs 1224
- Displaying ACLs 1225
- Assigned to VTY 1225
- ACL Commands 1227
- Chapter 74: ACL Commands 1228
- ACCESS-CLASS 1229
- ACCESS-GROUP 1231
- ACCESS-LIST (MAC Address) 1233
- Confirmation Commands 1234
- ACCESS-LIST ICMP 1236
- ACCESS-LIST IP 1239
- ACCESS-LIST PROTO 1243
- ACCESS-LIST TCP 1248
- ACCESS-LIST UDP 1252
- MAC ACCESS-GROUP 1256
- NO ACCESS-LIST 1257
- NO ACCESS-GROUP 1258
- NO MAC ACCESS-GROUP 1259
- SHOW ACCESS-LIST 1260
- SHOW INTERFACE ACCESS-GROUP 1262
- Chapter 75 1263
- MLS QOS ENABLE 1265
- MLS QOS MAP COS-QUEUE 1266
- MLS QOS MAP DSCP-QUEUE 1268
- MLS QOS QUEUE 1270
- MLS QOS SET COS 1271
- MLS QOS SET DSCP 1272
- MLS QOS TRUST COS 1273
- MLS QOS TRUST DSCP 1274
- NO MLS QOS ENABLE 1275
- NO WRR-QUEUE WEIGHT 1276
- SHOW MLS QOS INTERFACE 1277
- (continued) 1278
- SHOW MLS QOS MAPS COS-QUEUE 1280
- SHOW MLS QOS MAPS DSCP-QUEUE 1281
- WRR-QUEUE WEIGHT 1283
- Management Security 1285
- Local Manager Accounts 1287
- Password 1289
- Encryption 1289
- Configuration 1297
- Chapter 77 1299
- ENABLE PASSWORD 1300
- NO ENABLE PASSWORD 1302
- NO USERNAME 1304
- SERVICE PASSWORD-ENCRYPTION 1305
- USERNAME 1306
- Telnet Server 1309
- Enabling the Telnet Server 1311
- Disabling the Telnet Server 1312
- Displaying the Telnet Server 1313
- Chapter 78: Telnet Server 1314
- Telnet Server Commands 1315
- NO SERVICE TELNET 1316
- SERVICE TELNET 1317
- SHOW TELNET 1318
- Telnet Client 1319
- Chapter 80: Telnet Client 1322
- Telnet Client Commands 1323
- TELNET IPV6 1325
- Secure Shell (SSH) Server 1327
- Support for SSH 1329
- SSH and Enhanced Stacking 1331
- Enabling the SSH Server 1334
- Disabling the SSH Server 1335
- Deleting Encryption Keys 1336
- Displaying the SSH Server 1337
- SSH Server Commands 1339
- CRYPTO KEY DESTROY HOSTKEY 1340
- CRYPTO KEY GENERATE HOSTKEY 1342
- NO SERVICE SSH 1344
- SERVICE SSH 1345
- SHOW CRYPTO KEY HOSTKEY 1346
- SHOW SSH SERVER 1347
- Chapter 84 1349
- HTTP server enabled. Port 80 1354
- SERVICE HTTP 1356
- IP HTTP PORT 1357
- NO SERVICE HTTP 1358
- SHOW IP HTTP 1359
- Chapter 86 1361
- Distinguished 1363
- generate 1365
- CRYPTO CERTIFICATE DESTROY 1376
- CRYPTO CERTIFICATE GENERATE 1377
- CRYPTO CERTIFICATE IMPORT 1380
- CRYPTO CERTIFICATE REQUEST 1381
- SERVICE HTTPS 1383
- IP HTTPS CERTIFICATE 1384
- NO SERVICE HTTPS 1385
- SHOW CRYPTO CERTIFICATE 1386
- SHOW IP HTTPS 1387
- RADIUS and TACACS+ Clients 1389
- Remote Manager Accounts 1391
- Managing the RADIUS Client 1394
- Specifying a 1395
- RADIUS Global 1395
- Encryption Key 1395
- Specifying the 1395
- Server Timeout 1395
- Deleting Server 1397
- IP Addresses 1397
- Displaying the 1397
- RADIUS Client 1397
- Managing the TACACS+ Client 1398
- RADIUS and TACACS+ Client 1405
- AAA ACCOUNTING LOGIN 1407
- tacacs [ 1409
- AAA AUTHENTICATION LOGIN 1411
- IP RADIUS SOURCE-INTERFACE 1413
- LOGIN AUTHENTICATION 1415
- NO LOGIN AUTHENTICATION 1417
- NO RADIUS-SERVER HOST 1418
- NO TACACS-SERVER HOST 1419
- RADIUS-SERVER HOST 1420
- RADIUS-SERVER KEY 1422
- RADIUS-SERVER TIMEOUT 1423
- SHOW RADIUS 1424
- SHOW TACACS 1426
- TACACS-SERVER HOST 1428
- TACACS-SERVER KEY 1429
- TACACS-SERVER TIMEOUT 1430
- System Monitoring Commands 1431
- SHOW CPU 1432
- SHOW CPU HISTORY 1433
- SHOW CPU USER-THREADS 1434
- SHOW MEMORY 1435
- SHOW MEMORY ALLOCATION 1436
- SHOW MEMORY HISTORY 1437
- SHOW MEMORY POOLS 1438
- SHOW PROCESS 1439
- SHOW SYSTEM SERIALNUMBER 1440
- SHOW SYSTEM INTERRUPTS 1441
- SHOW TECH-SUPPORT 1442
- Appendix B 1445
- Boot Configuration File 1446
- Class of Service 1447
- Console Port 1448
- Status Disabled 1450
- Port 1813 1450
- Enhanced Stacking 1451
- IGMP Snooping 1453
- MAC Address Table 1456
- Management IP Address 1457
- Manager Account 1458
- Port Settings 1459
- Secure Shell Server 1463
- SNMP Status Disabled 1465
- Simple Network Time Protocol 1466
- Multiple 1468
- Spanning Tree 1468
- Protocol 1468
- System Name 1469
- TACACS+ Client 1470
- Web Server 1473
- Command Index 1475
Související produkty a manuály pro Počítačový hardware Allied-telesis AT-9000 Series
(404 stránky)
(46 stránky)© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.083 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce