Allied-telesis AT-8100 Series Uživatelský manuál stáhnout pdf (Strana 196)

Chapter 9: Port Parameters

196

Displaying Threshold Limit Settings on Ports

To display the threshold settings for the ingress packets on the ports, use

the SHOW STORM-CONTROL command in the Privileged Exec mode.

Here is the format:

show storm-control [

port

]

This example of the command displays the broadcast, multicast and dif

levels on ports 18:

awplus# show storm-control port1.0.18

Here is an example of the information the command displays.

Figure 47. SHOW STORM-CONTROL Command

The columns are described in Table 15 on page 240.

If the parameter port is not specified, the command displays the threshold

settings on all the ports on the switch.

If you want to display information on multiple ports at a time, enter:

awplus# show storm-control port1.0.18,port1.0.20,port1.0.21

Here is an example of the information the command displays.

Figure 48. SHOW STORM-CONTROL Command

Port Bcastlevel Mcastlevel Diflevel

port1.0.18 30 100 100

Port Bcastlevel Mcastlevel Diflevel

port1.0.18 30 100 100

Port1.0.20 100 50 100

port1.0.21 100 100 100

1 2 ... 191 192 193 194 195 196

Žádné komentáře

Allied-telesis AT-8100 Series Uživatelský manuál Strana 196