Allied-telesis AT-2972T/2 Uživatelský manuál Strana 84

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 144
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 83
Installing the NetWare Driver Software
84
Driver Installation
This chapter describes how to perform the following tasks:
Verify that the required OS support files are installed on the server and
the NetWare pre-installation parameters are set correctly.
Install the driver software in the Novell NetWare environment.
If necessary, reconfigure the driver software after installation.
For an adapter installation with an existing NetWare server, NetWare
automatically detects the new adapter and attempts to load the
appropriate driver. Ensure that your Allied Telesis CD-ROM is loaded
and select the appropriate driver for your Allied Telesis Gigabit
Ethernet adapter.
A commonly used method to install a driver on a NetWare server running
5.x or 6.0 and higher is through NWCONFIG.
Zobrazit stránku 83
1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 143 144

Komentáře k této Příručce

Žádné komentáře